This browser doesn't support HTML5 canvas! Continuous stirred tank heater (CSTH) 20.00℃ 55.00℃ 24.50kw 55.00℃ 55.00℃ 24.50kw 50.0% 50.0% 50.0% Free Mode Preset Mode Controller Process nature: Normal Easy Hard Simulation speed: Normal Slow Fast Feed temperature,℃ = SP temperature, ℃ = MV power, kw = Reinitialize I-mode of PID (at t=0) Show sliders for MV & SP Run Process nature: Normal Easy Hard MV change (+25% at 1min) DV change (+14℃ at 1min) with DV change at 5min For time response, tmax= Run Simulation speed: Normal Slow Fast Closed-loop response (SP) Closed-loop response (DV) PID tuning parameter ParameterValue Kc 1/Ti (1/min) Td (min) Run D-kick removal Anti-reset windup Constrained MV (Umax=) P-kick removal (α=) Direct acting (default: reverse) * D-mode Filter (N=) This browser doesn't support HTML5 canvas! Hold graph on Auto scale on Y A control cannot exist without sensors and actuators as we cannot without air! Each variable has physical unit (℃ and kw) and level of signal transmitter (%). In Automatic mode, you only can change the SP and PID tuning parameters in controller tab. PerformanceValue Rise time (min) Settling time (min) Overshoot (%) Peak ITAE0/0
Free Mode