| 1 |
Fracture characteristics of mixed-mode toughness of dissimilar adherends (cohesive and interfacial fracture)
Abadi RH, Torun AR, Fard AMZ, Choupani N
Journal of Adhesion Science and Technology, 34(6), 599, 2020 |
| 2 |
Influence of graphene nanoplatelets (GNPs) on mode I fracture toughness of an epoxy adhesive under thermal fatigue
Mohamed M, Taheri F
Journal of Adhesion Science and Technology, 31(19-20), 2105, 2017 |
| 3 |
Adhesive failure of sandwich structures under combined fatigue and thermal loading
Yan LT, Wang YJ, Yang ZP
Journal of Adhesion Science and Technology, 30(11), 1201, 2016 |
| 4 |
Effect of Bondline Thickness on Mixed-Mode Fracture of Adhesively Bonded Joints
Khoo TTR, Kim H
Journal of Adhesion, 87(10), 989, 2011 |
| 5 |
Mechanical Properties of Nanoclay Reinforced Epoxy Adhesive Bonded Joints Made with Composite Materials
Khalili SMR, Tavakolian M, Sarabi A
Journal of Adhesion Science and Technology, 24(11-12), 1917, 2010 |
| 6 |
Increasing strength of single lap joints of metal adherends by taper minimization
Sancaktar E, Nirantar P
Journal of Adhesion Science and Technology, 17(5), 655, 2003 |
| 7 |
Stress analysis and strength estimation of butt adhesive joints of dissimilar hollow cylinders under impact tensile loadings
Sawa T, Suzuki Y, Kido S
Journal of Adhesion Science and Technology, 17(7), 943, 2003 |
| 8 |
Thermal non-linear elastic stress analysis of an adhesively bonded T-joint
Apalak MK, Apalak ZG, Gunes R
Journal of Adhesion Science and Technology, 17(7), 995, 2003 |
| 9 |
Three-dimensional finite element stress analysis of single-lap adhesive joints of dissimilar adherends subjected to impact tensile loads
Sawa T, Higuchi I, Suga H
Journal of Adhesion Science and Technology, 17(16), 2157, 2003 |
| 10 |
On the non-linear elastic stresses in an adhesively bonded T-joint with double support
Apalak MK
Journal of Adhesion Science and Technology, 16(4), 459, 2002 |
