| 1 |
Flexibility and electrical stability of polyester-based device electrodes under monotonic and cyclic buckling conditions
Potoczny GA, Bejitual TS, Abell JS, Sierros KA, Cairns DR, Kukureka SN
Thin Solid Films, 528, 205, 2013 |
| 2 |
Dielectric properties of pulsed-laser deposited indium tin oxide thin films
Giusti G, Bowen J, Ramasse Q, Rey G, Blackburn E, Tian L, Jones IP, Abell JS
Thin Solid Films, 524, 249, 2012 |
| 3 |
Pulsed laser deposition of indium tin oxide films on flexible polyethylene naphthalate display substrates at room temperature
Sierros KA, Cairns DR, Abell JS, Kukureka SN
Thin Solid Films, 518(10), 2623, 2010 |
| 4 |
Improved critical current densities in thick YBa2Cu3O7-delta multilayer films interspaced with non-superconducting YBa2Cu3Ox nanodots
Sarkar A, Dang VS, Mikheenko P, Kechik MMA, Abell JS, Crisan A
Thin Solid Films, 519(2), 876, 2010 |
| 5 |
Thermal characterization of an optical floating zone furnace: A direct link with controllable growth parameters
Koohpayeh SM, Fort D, Bradshaw A, Abell JS
Journal of Crystal Growth, 311(8), 2513, 2009 |
| 6 |
Microstructure-Property relationships in thin film ITO
Giusti G, Tian L, Jones IP, Abell JS, Bowen J
Thin Solid Films, 518(4), 1140, 2009 |
| 7 |
Improved microstructural features in screen printed NdBCO thick films on YSZ substrates
Moussa MA, Abell JS, Shields TC
Journal of Materials Science, 42(2), 692, 2007 |
| 8 |
Some observations on the growth of rutile single crystals using the optical floating zone method
Koohpayeh SM, Fort D, Abell JS
Journal of Crystal Growth, 282(1-2), 190, 2005 |
| 9 |
Application of top seeding in the melt processing of Nd-123 thick films on YSZ substrates: I buffer layer optimization
Moussa MA, Abell JS, Shields TC
Journal of Materials Science, 40(18), 4859, 2005 |
| 10 |
Holes in YBa2CU3O7-x thin films on vicinal strontium titanate substrates
Jackson TJ, Abell JS, Chakalov R, Colclough MS, Darlington CNW, Jones IP, Kong G, Muirhead CM, Wellhofer F
Thin Solid Films, 468(1-2), 332, 2004 |
