| 1 |
Influence of sloping baffle plates on the mass transport and performance of PEMFC
Yin Y, Wang XF, Zhang JF, Xiang SG, Qin YZ
International Journal of Energy Research, 43(7), 2643, 2019 |
| 2 |
Numerical investigation on the characteristics of mass transport and performance of PEMFC with baffle plates installed in the flow channel
Yin Y, Wang XF, Xiang SG, Zhang JF, Qin YZ
International Journal of Hydrogen Energy, 43(16), 8048, 2018 |
| 3 |
Experimental study of a novel integrated system of indirect evaporative cooler with internal baffles and evaporative condenser
Kabeel AE, Bassuoni MM, Abdelgaied M
Energy Conversion and Management, 138, 518, 2017 |
| 4 |
Structural Optimizations of U- and Z-Type Manifolds for Uniform Flow Distribution by Applying an Increaser and Baffle Plates
Xie JL, Shao Y, Xu YM, Yang J, Zhang SW
Chemical Engineering & Technology, 38(12), 2217, 2015 |
| 5 |
Simulation of an enhanced integrated collector-storage solar water heater
Ziapour BM, Aghamiri A
Energy Conversion and Management, 78, 193, 2014 |
| 6 |
Non-isothermal transport phenomenon and cell performance of a cathodic PEM fuel cell with a baffle plate in a tapered channel
Perng SW, Wu HW
Applied Energy, 88(1), 52, 2011 |
| 7 |
EXPERIMENTAL STUDY OF HYDROMECHANICS AND MASS TRANSFER CHARACTERISTICS IN CROSS FLOW PACKED TOWER
Tang LX, Ji JL, Wang X, Ding ZP
Canadian Journal of Chemical Engineering, 89(6), 1516, 2011 |
| 8 |
Comparative performance investigation of integrated collector-storage solar water heaters with various heat loss reduction strategies
Kumar R, Rosen MA
International Journal of Energy Research, 35(13), 1179, 2011 |
| 9 |
Accurate measurement of pressure differences and the effect of baffle on pressure distribution in vacuum chamber during dynamic gas flow
Khan W, Choi IM, Lim JY, Hong SS
Current Applied Physics, 10(2), 538, 2010 |
| 10 |
An L-9 orthogonal design methodology to study the impact of operating parameters on particulate emission and related characteristics during pulse-jet filtration process
Mukhopadhyay A, Dhawan K
Powder Technology, 195(2), 128, 2009 |
