| 1 |
Design and optimization of CO2 pressurization system integrated with a supercritical CO2 power cycle for the CO2 capture and storage system
Muhammad HA, Lee G, Cho J, Bhatti UH, Baik YJ, Lee B
Energy Conversion and Management, 195, 609, 2019 |
| 2 |
Investigation of leakage reinjection system for supercritical CO2 power cycle using heat pump
Muhammad HA, Lee B, Lee G, Cho J, Baik YJ
Renewable Energy, 144, 97, 2019 |
| 3 |
Palladium nanoparticles from surfactant/fast-reduction combination one-pot synthesis for the liquid fuel cell applications
Ko YJ, Kim JY, Lee KS, Park JK, Baik YJ, Choi HJ, Lee WS
International Journal of Hydrogen Energy, 43(41), 19029, 2018 |
| 4 |
Tungsten carbide nanowalls as electrocatalyst for hydrogen evolution reaction: New approach to durability issue
Ko YJ, Cho JM, Kim I, Jeong DS, Lee KS, Park JK, Baik YJ, Choi HJ, Lee WS
Applied Catalysis B: Environmental, 203, 684, 2017 |
| 5 |
Impacts of building envelope design factors upon energy loads and their optimization in US standard climate zones using experimental design
Yong SG, Kim JH, Gim Y, Kim J, Cho J, Hong H, Baik YJ, Koo J
Energy and Buildings, 141, 1, 2017 |
| 6 |
A mathematical correlation for predicting the thermal performance of cross, parallel, and counterflow PCHEs
Kim W, Baik YJ, Jeon S, Jeon D, Byon C
International Journal of Heat and Mass Transfer, 106, 1294, 2017 |
| 7 |
Heat transfer performance of wavy-channeled PCHEs and the effects of waviness factors
Baik YJ, Jeon S, Kim B, Jeon D, Byon C
International Journal of Heat and Mass Transfer, 114, 809, 2017 |
| 8 |
Enhanced natural convection heat transfer of a chimney-based radial heat sink
Li B, Baik YJ, Byon C
Energy Conversion and Management, 108, 422, 2016 |
| 9 |
Development of the turbomachinery for the supercritical carbon dioxide power cycle
Cho J, Choi M, Baik YJ, Lee G, Ra HS, Kim B, Kim M
International Journal of Energy Research, 40(5), 587, 2016 |
| 10 |
Performance Evaluation of Geothermal Heat Pump With Direct Expansion Type Vertical Ground Heat Exchanger
Kim M, Lee G, Baik YJ, Ra HS
Heat Transfer Engineering, 36(12), 1046, 2015 |
