| 1 |
Utilisation of pre-oxidised ore in the pelletised chromite pre-reduction process
Kleynhans ELJ, Neizel BW, Beukes JP, van Zyl PG
Minerals Engineering, 92, 114, 2016 |
| 2 |
Predicting the toluene- and quinoline insoluble contents of coal tar pitches used as binders in Soderberg electrodes
Shoko L, Beukes JP, Strydom CA, Larsen B, Lindstad L
International Journal of Mineral Processing, 144, 46, 2015 |
| 3 |
Reducing atmosphere ash fusion temperatures of a mixture of coal-associated minerals - The effect of inorganic additives and ashing temperature
Nel MV, Strydorn CA, Schobert HH, Beukes JP, Bunt JR
Fuel Processing Technology, 124, 78, 2014 |
| 4 |
Characterisation and liberation of chromium from fine ferrochrome waste materials
van Staden Y, Beukes JP, van Zyl PG, du Toit JS, Dawson NF
Minerals Engineering, 56, 112, 2014 |
| 5 |
Why is CaCO3 not used as an additive in the pelletised chromite pre-reduction process?
Neizel BW, Beukes JP, van Zyl PG, Dawson NF
Minerals Engineering, 45, 115, 2013 |
| 6 |
The use of thermomechanical analysis to characterise Soderberg electrode paste raw materials
Beukes JP, Roos H, Shoko L, van Zyl PG, Neomagus HWJP, Strydom CA, Dawson NF
Minerals Engineering, 46-47, 167, 2013 |
| 7 |
Determining the baking isotherm temperature of Soderberg electrodes and associated structural changes
Shoko L, Beukes JP, Strydom CA
Minerals Engineering, 49, 33, 2013 |
| 8 |
Unique challenges of clay binders in a pelletised chromite pre-reduction process
Kleynhans ELJ, Beukes JP, Van Zyl PG, Kestens PHI, Langa JM
Minerals Engineering, 34, 55, 2012 |
| 9 |
Unique challenges of clay binders in a pelletised chromite pre-reduction process
Kleynhans ELJ, Beukes JP, Van Zyl PG, Kestens PHI, Langa JM
Minerals Engineering, 34, 55, 2012 |
| 10 |
Comparison of sintering and compressive strength tendencies of a model coal mineral mixture heat-treated in inert and oxidizing atmospheres
Nel MV, Strydom CA, Schobert HH, Beukes JP, Bunt JR
Fuel Processing Technology, 92(5), 1042, 2011 |
