1 |
Modelling and simulation of an alkaline electrolyser cell Abdin Z, Webb CJ, Gray EM Energy, 138, 316, 2017 |
2 |
Impact of Fe(III) as an effective electron-shuttle mediator for enhanced Cr(VI) reduction in microbial fuel cells: Reduction of diffusional resistances and cathode overpotentials Wang Q, Huang LP, Pan YZ, Quan X, Puma GL Journal of Hazardous Materials, 321, 896, 2017 |
3 |
Synthesis of nanocrystalline lanthanum manganite with tailored particulate size and morphology using a novel spray pyrolysis technique for application as the functional solid oxide fuel cell cathode Mukhopadhyay J, Maiti HS, Basu RN Journal of Power Sources, 232, 55, 2013 |
4 |
Design of a deflected membrane electrode assembly for PEMFCs Ahmed DH, Sung HJ International Journal of Heat and Mass Transfer, 51(21-22), 5443, 2008 |
5 |
Effect of GDL permeability on water and thermal management in PEMFCs -I. Isotropic and anisotropic permeability Ahmed DH, Sung HJ, Bae J International Journal of Hydrogen Energy, 33(14), 3767, 2008 |
6 |
Effect of GDL permeability on water and thermal management in PEMFCs -II. Clamping force Ahmed DH, Sung HJ, Bae J International Journal of Hydrogen Energy, 33(14), 3786, 2008 |
7 |
Visualization of oxygen transport behavior at metal electrode/oxide electrolyte interface using secondary ion mass spectrometry Kishimoto H, Sakai N, Yamaji K, Horita T, Brito ME, Yokokawa H, Amezawa K, Uchimoto Y Solid State Ionics, 179(9-10), 347, 2008 |
8 |
Low methanol crossover and high performance of DMFCs achieved with a pore-filling polymer electrolyte membrane Yamauchi A, Ito T, Yamaguchi T Journal of Power Sources, 174(1), 170, 2007 |
9 |
Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation Part II: Results of sensitivity analysis and validation of the model Min CH, He Y, Liu XL, Yin BH, Jiang W, Tao WQ Journal of Power Sources, 160(1), 374, 2006 |
10 |
Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density Ahmed DH, Sung HJ Journal of Power Sources, 162(1), 327, 2006 |