| 1 |
Near-eutectic Zn-Mg alloys: Interrelations of solidification thermal parameters, microstructure length scale and tensile/corrosion properties
Vida TA, Brito C, Lima TS, Spinelli JE, Cheung N, Garcia A
Current Applied Physics, 19(5), 582, 2019 |
| 2 |
Design and Control of a Decoupled Rotary-Linear Switched Reluctance Motor
Li SY, Cheng KWE, Cheung N, Zou Y
IEEE Transactions on Energy Conversion, 33(3), 1363, 2018 |
| 3 |
Microstructure characterization of a directionally solidified Mg-12wt.%Zn alloy: Equiaxed dendrites, eutectic mixture and type/morphology of intermetallics
Verissimo NC, Brito C, Afonso CR, Spinelli JE, Cheung N, Garcia A
Materials Chemistry and Physics, 204, 105, 2018 |
| 4 |
Evaluation of thermophysical properties of Al-Sn-Si alloys based on computational thermodynamics and validation by numerical and experimental simulation of solidification
Bertelli F, Cheung N, Ferreira IL, Garcia A
Journal of Chemical Thermodynamics, 98, 9, 2016 |
| 5 |
Cellular to dendritic transition during transient solidification of a eutectic Sn-0.7 wt%Cu solder alloy
Moura ITL, Silva CLM, Cheung N, Goulart PR, Garcia A, Spinelli JE
Materials Chemistry and Physics, 132(1), 203, 2012 |
| 6 |
Inward and outward solidification of cylindrical castings: The role of the metal/mold heat transfer coefficient
Bertelli F, Brito C, Meza ES, Cheung N, Garcia A
Materials Chemistry and Physics, 136(2-3), 545, 2012 |
| 7 |
The effects of cell spacing and distribution of intermetallic fibers on the mechanical properties of hypoeutectic Al-Fe alloys
Goulart PR, Spinelli JE, Cheung N, Garcia A
Materials Chemistry and Physics, 119(1-2), 272, 2010 |
| 8 |
Interfacial heat transfer coefficients and solidification of an aluminum alloy in a rotary continuous caster
Cheung N, Santos NS, Quaresma JMV, Dulikravich GS, Garcia A
International Journal of Heat and Mass Transfer, 52(1-2), 451, 2009 |
| 9 |
Inverse segregation during transient directional solidification of an Al-Sn alloy: Numerical and experimental analysis
Cruz KS, Ferreira IL, Spinelli JE, Cheung N, Garcia A
Materials Chemistry and Physics, 115(1), 116, 2009 |
| 10 |
Microstructural modification by laser surface remelting and its effect on the corrosion resistance of an Al-9 wt% Si casting alloy
Osorio WR, Cheung N, Spinelli JE, Cruz KS, Gacia A
Applied Surface Science, 254(9), 2763, 2008 |
