| 1 |
Utilization of woody biomass combustion fly ash as a filler in the glue used for plywood production
Fukui K, Momen K, Ichiba G, Fukasawa T, Ishigami T
Advanced Powder Technology, 31(11), 4482, 2020 |
| 2 |
Characteristics of ash formation in the process of combustion of pelletised leather tannery waste and hardwood pellets
Kluska J, Turzynski T, Ochnio M, Karda D
Renewable Energy, 149, 1246, 2020 |
| 3 |
Combined manganese oxides as oxygen carriers for biomass combustion - Ash interactions
Stanicic I, Andersson V, Hanning M, Mattisson T, Backman R, Leion H
Chemical Engineering Research & Design, 149, 104, 2019 |
| 4 |
A comparison of turbulence models and two and three dimensional meshes for unsteady CFD ash deposition tools
Perez MG, Vakkilainen E
Fuel, 237, 806, 2019 |
| 5 |
Combustion characteristics of straw stored with CaCO3 in bubbling fluidized bed using quartz and olivine as bed materials
Bozaghian M, Rebbling A, Larsson SH, Thyrel M, Xiong SJ, Skoglund N
Applied Energy, 212, 1400, 2018 |
| 6 |
Parametric studies on corn straw combustion characteristics in a fixed bed: Ash and moisture content
Meng XX, Sun R, Ismail TM, Zhou W, Ren XH, Zhang RH
Energy, 158, 192, 2018 |
| 7 |
Scavenging of refractory elements (Ca, Mg, Fe) by kaolin during low rank coal combustion
Zeng XP, Yu DX, Liu FQ, Fan B, Wen C, Yu X, Xu MH
Fuel, 223, 198, 2018 |
| 8 |
Effect of kaolin on ash partitioning during combustion of a low-rank coal in O-2/CO2 atmosphere
Chen J, Jiao FC, Dong ZB, Niyomura O, Namioka T, Yamada N, Ninomiya Y
Fuel, 222, 538, 2018 |
| 9 |
Blending effect of sewage sludge and woody biomass into coal on combustion and ash agglomeration behavior
Namkung H, Lee YJ, Park JH, Song GS, Choi JW, Choi YC, Park SJ, Kim JG
Fuel, 225, 266, 2018 |
| 10 |
Comprehensive CFD modeling of the ash deposition in a biomass packed bed burner
Chapela S, Porteiro J, Gomez MA, Patino D, Miguez JL
Fuel, 234, 1099, 2018 |
