| 1 |
Early stages of agglomeration of adhesive particles in fully-developed turbulent pipe flows
Haervig J, Sorensen K, Condra TJ
International Journal of Multiphase Flow, 106, 254, 2018 |
| 2 |
On the fully-developed heat transfer enhancing flow field in sinusoidally, spirally corrugated tubes using computational fluid dynamics
Haervig J, Sorensen K, Condra TJ
International Journal of Heat and Mass Transfer, 106, 1051, 2017 |
| 3 |
On the adhesive JKR contact and rolling models for reduced particle stiffness discrete element simulations
Haervig J, Kleinhans U, Wieland C, Spliethoff H, Jensen AL, Sorensen K, Condra TJ
Powder Technology, 319, 472, 2017 |
| 4 |
Guidelines for optimal selection of working fluid for an organic Rankine cycle in relation to waste heat recovery
Haervig J, Sorensen K, Condra TJ
Energy, 96, 592, 2016 |
| 5 |
Energy efficiency analysis and impact evaluation of the application of thermoelectric power cycle to today's CHP systems
Chen M, Lund H, Rosendahl LA, Condra TJ
Applied Energy, 87(4), 1231, 2010 |
| 6 |
Numerical Modeling of Thermoelectric Generators With Varing Material Properties in a Circuit Simulator
Chen M, Rosendahl LA, Condra TJ, Pedersen JK
IEEE Transactions on Energy Conversion, 24(1), 112, 2009 |
| 7 |
Use of numerical modeling in design for co-firing biomass in wall-fired burners
Yin CG, Rosendahl L, Kaer SK, Condra TJ
Chemical Engineering Science, 59(16), 3281, 2004 |
| 8 |
Further study of the gas temperature deviation in large-scale tangentially coal-fired boilers
Yin CG, Rosendahl L, Condra TJ
Fuel, 82(9), 1127, 2003 |
