| 1 |
Optimized inlet geometry of a laidback fan-shaped film cooling hole - Experimental study of film cooling performance
Fraas M, Glasenapp T, Schulz A, Bauer HJ
International Journal of Heat and Mass Transfer, 128, 980, 2019 |
| 2 |
Study on heat transfer model of coolant boundary layer during high speed cutting process
Zhang YC, Yang Y, Li Q, Li YB
International Journal of Heat and Mass Transfer, 114, 1304, 2017 |
| 3 |
Influence of operating conditions on the optimum design of electric vehicle battery cooling plates
Jarrett A, Kim IY
Journal of Power Sources, 245, 644, 2014 |
| 4 |
A review on air flow and coolant flow circuit in vehicles' cooling system
Pang SC, Kalam MA, Masjuki HH, Hazrat MA
International Journal of Heat and Mass Transfer, 55(23-24), 6295, 2012 |
| 5 |
Investigations on heat and mass transfer characteristics of falling film horizontal tubular absorber
Harikrishnan L, Maiya MP, Tiwari S
International Journal of Heat and Mass Transfer, 54(11-12), 2609, 2011 |
| 6 |
Design optimization of electric vehicle battery cooling plates for thermal performance
Jarrett A, Kim IY
Journal of Power Sources, 196(23), 10359, 2011 |
| 7 |
Investigation of coolant flow distribution and the effects of cavitation on water pump performance in an automotive cooling system
Kim K, Hwang K, Lee K, Lee K
International Journal of Energy Research, 33(3), 224, 2009 |
| 8 |
Configuration effects of air, fuel, and coolant inlets on the performance of a proton exchange membrane fuel cell for automotive applications
Kang S, Min K, Mueller F, Brouwer J
International Journal of Hydrogen Energy, 34(16), 6749, 2009 |
| 9 |
Numerical study to examine the performance of multi-pass serpentine flow-fields for cooling plates in polymer electrolyte membrane fuel cells
Yu SH, Sohn S, Nam JH, Kim CJ
Journal of Power Sources, 194(2), 697, 2009 |
| 10 |
A generic controller for part surface temperature on a plastic injection molding machine
Dubay R, Pramujati B, Hernandez M
Advances in Polymer Technology, 25(1), 1, 2006 |
