1 |
Extended state observer assisted Coulomb counting method for battery state of charge estimation Lei ZL, Liu T, Sun XM, Xie H, Sun Q International Journal of Energy Research, 45(2), 3157, 2021 |
2 |
An experimental method to measure the friction coefficients between a round particle and a flat plate Zhao S, Schneider HC, Kamlah M Powder Technology, 361, 983, 2020 |
3 |
Quantitative comparison of experimental and Mohr-Coulomb finite element method simulation flow characteristics from quasi two-dimensional flat-bottomed bins Pardikar K, Zahid S, Wassgren C Powder Technology, 367, 689, 2020 |
4 |
Stress analysis of blade Rheometry by DEM simulations Nan WG, Gu YQ Powder Technology, 376, 332, 2020 |
5 |
Computational discovery of the strongest base: Diethynylborazine dianion Rohman SS, Kashyap C, Ullah SS, Guha AK Chemical Physics Letters, 714, 65, 2019 |
6 |
Potential Formulation for Charge or Current-Controlled Piezoelectric Smart Composites and Stabilization Results: Electrostatic Versus Quasi-Static Versus Fully-Dynamic Approaches Ozer AO IEEE Transactions on Automatic Control, 64(3), 989, 2019 |
7 |
State-of-Charge Estimation for Li-Ion Batteries: A More Accurate Hybrid Approach Misyris GS, Doukas DI, Papadopoulos TA, Labridis DP, Agelidis VG IEEE Transactions on Energy Conversion, 34(1), 109, 2019 |
8 |
Predicting the critical outlet width of a hopper using a continuum finite element method model Pardikar K, Wassgren C Powder Technology, 356, 649, 2019 |
9 |
The effect of short-range interaction and correlations on the charge and electric field distribution in a model solid electrolyte Patsahan T, Bokun G, di Caprio D, Holovko M, Vikhrenko V Solid State Ionics, 335, 156, 2019 |
10 |
Mobility extraction for short channel UTBB-FDSOI MOSFETs under back bias using an accurate inversion charge density model Trojman L, Ragnarsson LA, Collaert N Solid-State Electronics, 154, 24, 2019 |