| 1 |
Y Alleviating dependency on fossil fuel by using cow-dung during iron ore pelletization; Assessment of pellet physical and metallurgical properties
Sahu SN, Biswal SK
Powder Technology, 381, 401, 2021 |
| 2 |
Hot-air drying behavior and fragmentation characteristic of single lignite particle
Gao MQ, Wan KJ, Miao ZY, He QQ, Ji PC, Pei Z
Fuel, 247, 209, 2019 |
| 3 |
Effects of porosity and pore size distribution on mechanical strength reliability of industrial-scale catalyst during preparation and catalytic test steps
Zakeri M, Samimi A, Afarani MS, Salehirad A
Particulate Science and Technology, 36(1), 96, 2018 |
| 4 |
Length-to-Diameter Ratio of Extrudates in Catalyst Technology: III. Catalyst Breakage in a Fixed Bed
Beeckman JWL, Cunningham M, Fassbender NA, Datz TE
Chemical Engineering & Technology, 40(10), 1844, 2017 |
| 5 |
Reduction behavior and crushing strength of carbon-containing pellet prepared from COG tar
Mochizuki Y, Nishio M, Tsubouchi N, Akiyama T
Fuel Processing Technology, 142, 287, 2016 |
| 6 |
Reduction behavior and crushing strength of carbon-containing iron ore sinters prepared from tar recovered from coke oven gas
Mochizuki Y, Tsubouchi N, Akiyama T
Fuel Processing Technology, 138, 704, 2015 |
| 7 |
Effect of adding limestone on the metallurgical properties of iron ore pellets
Iljana M, Kemppainen A, Paananen T, Mattila O, Pisila E, Kondrakov M, Fabritius T
International Journal of Mineral Processing, 141, 34, 2015 |
| 8 |
Compaction of palm kernel shell biochars for application as solid fuel
Bazargan A, Rough SL, McKay G
Biomass & Bioenergy, 70, 489, 2014 |
| 9 |
Supported on alumina Co-Mo hydrotreating catalysts: Dependence of catalytic and strength characteristics on the initial AlOOH particle morphology
Klimov OV, Leonova KA, Koryakina GI, Gerasimov EY, Prosvirin IP, Cherepanova SV, Budukva SV, Pereyma VY, Dik PP, Parakhin OA, Noskov AS
Catalysis Today, 220, 66, 2014 |
| 10 |
Development and testing of ilmenite granules for packed bed chemical-looping combustion
Ortiz M, Gallucci F, Snijkers F, Van Noyen J, Louradour E, Tournigant D, Annaland MV
Chemical Engineering Journal, 245, 228, 2014 |
