| 1 |
Impact of binder constituents on the moldability of titanium-based feedstocks used in low-pressure powder injection molding
Cote R, Azzouni M, Demers V
Powder Technology, 381, 255, 2021 |
| 2 |
Molding properties of titanium-based feedstock used in low-pressure powder injection molding
Ghanmi O, Demers V
Powder Technology, 379, 515, 2021 |
| 3 |
Numerical simulation and experimental investigation of mold filling and segregation in low-pressure powder injection molding of metallic feedstock
Ben Trad MA, Demers V, Cote R, Sardarian M, Dufresne L
Advanced Powder Technology, 31(3), 1349, 2020 |
| 4 |
Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding
Demers V, Fareh F, Turenne S, Demarquette NR, Scalzo O
Advanced Powder Technology, 29(1), 180, 2018 |
| 5 |
Influence of segregation on rheological properties of wax-based feedstocks
Fareh F, Demers V, Demarquette NR, Turenne S, Scalzo O
Powder Technology, 320, 273, 2017 |
| 6 |
Segregation measurement of powder injection molding feedstock using thermogravimetric analysis, pycnometer density and differential scanning calorimetry techniques
Demers V, Turenne S, Scalzo O
Advanced Powder Technology, 26(3), 997, 2015 |
| 7 |
Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy
Demers V, Turenne S, Scalzo O
Journal of Materials Science, 50(7), 2893, 2015 |
| 8 |
Substructure and nanocrystalline structure effects in thermomechanically treated Ti-Ni alloys
Inaekyan KE, Prokoshkin SD, Brailovski V, Khmelevskaya IY, Demers V, Dobatkin SV, Tatyanin EV, Bastarache E
Materials Science Forum, 503-504, 597, 2006 |
