검색결과 : 22건
No. | Article |
---|---|
1 |
Effect of dicumyl peroxide concentration on the polymerization kinetics of a polysilazane system D'Elia R, Dusserre G, Del Confetto S, Eberling-Fux N, Descamps C, Cutard T Polymer Engineering and Science, 58(6), 859, 2018 |
2 |
Anisothermal thermosetting resin cure monitored by optical fiber refractometer Robert L, Dusserre G Polymer Engineering and Science, 54(3), 626, 2014 |
3 |
Assessment of Thermoset Cure-Induced Strains by Fiber Bragg Grating Sensor Robert L, Dusserre G Polymer Engineering and Science, 54(7), 1585, 2014 |
4 |
An experimental study of an LPG tank at low filling level heated by a remote wall Heymes F, Aprin L, Birk AM, Slangen P, Jarry JB, Francois H, Dusserre G Journal of Loss Prevention in The Process Industries, 26(6), 1484, 2013 |
5 |
An experimental investigation of evaporation rates for different volatile organic compounds Heymes F, Aprin L, Bony A, Forestier S, Cirocchi S, Dusserre G Process Safety Progress, 32(2), 193, 2013 |
6 |
Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests Dusserre G, Bernhart G, Schmidt FM, Dour G Journal of Non-Newtonian Fluid Mechanics, 166(21-22), 1229, 2011 |
7 |
Experimental study of hydraulic ram effects on a liquid storage tank: Analysis of overpressure and cavitation induced by a high-speed projectile Lecysyn N, Bony-Dandrieux A, Aprin L, Heymes F, Slangen P, Dusserre G, Munier L, Le Gallic C Journal of Hazardous Materials, 178(1-3), 635, 2010 |
8 |
Ballistic impact on an industrial tank: Study and modeling of consequences Lecysyn N, Dandrieuxa A, Heymes F, Aprin L, Slangen P, Munier L, Le Gallic C, Dusserre G Journal of Hazardous Materials, 172(2-3), 587, 2009 |
9 |
Preliminary study of ballistic impact on an industrial tank: Projectile velocity decay Lecysyn N, Dandrieux A, Heymes F, Slangen P, Munier L, Lapebie E, le Gallic C, Dusserre G Journal of Loss Prevention in The Process Industries, 21(6), 627, 2008 |
10 |
Environmental vulnerability assessment in the vicinity of an industrial site in the frame of ARAMIS European project Tixier J, Dandrieux A, Dusserre G, Bubbico R, Mazzarotta B, Silvetti B, Hubert E, Rodrigues N, Salvi O Journal of Hazardous Materials, 130(3), 251, 2006 |