1 |
Thermal stability analysis of Cu-11.8 wt%Al milled samples by TEM and HT-XRD Pascal NNS, Giordana MF, Napolitano F, Esquivel MR, Zelaya E Advanced Powder Technology, 28(10), 2605, 2017 |
2 |
A detailed study of phase evolution in Cu-16 at. % Al and Cu-30 at. % Al alloys under different types of mechanical alloying processes Giordana MF, Esquivel MR, Zelaya E Advanced Powder Technology, 26(2), 470, 2015 |
3 |
Scheme of thermal compression of hydrogen (TCH) using MmNi(4.25)Al(0.75) recovered with ethyl alcohol and handled under non protective atmospheres Obregon SA, Esquivel MR International Journal of Hydrogen Energy, 39(16), 8577, 2014 |
4 |
Mechanochemical synthesis of a La0.67Ce0.21Nd0.08Pr0.04Ni5 intermetallic compound Blanco V, Esquivel MR Advanced Powder Technology, 24(1), 86, 2013 |
5 |
Evolution of the phase stability of Ni-Al under low energy ball milling Zelaya E, Esquivel MR, Schryvers D Advanced Powder Technology, 24(6), 1063, 2013 |
6 |
Characterization of LaNi4.70Al0.30 handled in air and application to a scheme of thermal compression of hydrogen Ceron-Hurtado NM, Esquivel MR International Journal of Hydrogen Energy, 37(13), 10376, 2012 |
7 |
Synthesis of Al-containing MmNi(5) by mechanical alloying: Milling stages, structure parameters and thermal annealing Obregon SA, Andrade-Gamboa JJ, Esquivel MR International Journal of Hydrogen Energy, 37(19), 14972, 2012 |
8 |
Improvement of as-milled properties of mechanically alloyed LaNi5 and application to hydrogen thermal compression Talaganis BA, Esquivel MR, Meyer G International Journal of Hydrogen Energy, 36(18), 11961, 2011 |
9 |
Stages of mechanical alloying during the synthesis of Sn-containing AB(5)-based intermetallics Ceron-Hurtado NM, Esquivel MR International Journal of Hydrogen Energy, 35(11), 6057, 2010 |
10 |
A two-stage hydrogen compressor based on (La,Ce,Nd,Pr) Ni-5 intermetallics obtained by low energy mechanical alloying - Low temperature annealing treatment Talaganis BA, Esquivel MR, Meyer G International Journal of Hydrogen Energy, 34(4), 2062, 2009 |