| 1 |
Effects of Temperature on the Filtration Characteristics of a Dual-Layer Granular Bed Filter
Shen WJ, Yang GH, Liu P, Yao ZW, Shi HJ, Cui YY, Li Z
Chemical Engineering & Technology, 41(9), 1759, 2018 |
| 2 |
Sulfate reduction and filtration performances of an anaerobic membrane bioreactor (AnMBR)
Sahinkaya E, Yurtsever A, Isler E, Coban I, Aktas O
Chemical Engineering Journal, 349, 47, 2018 |
| 3 |
Low-cost monofilament mesh filter used in membrane bioreactor process: Filtration characteristics and resistance analysis
Poostchi AA, Mehrnia MR, Rezvani F, Sarrafzadeh MH
Desalination, 286, 429, 2012 |
| 4 |
The preparation and filtration characteristics of Dextran-MnO2 gel particles
Hwang KJ, Lyu SY, Chen FF
Powder Technology, 161(1), 41, 2006 |
| 5 |
SUR test used for optimisation of membrane filtration plants treating wastewater effluents
Roorda JH, van der Graaf JHM
Desalination, 179(1-3), 131, 2005 |
| 6 |
Melt-blown 방식에 의한 Polypropylene(PP) 카트리지 필터 제조시 공정인자가 필터소재의 여과특성에 미치는 영향
정수철, 안병길, 임승순
Journal of the Korean Industrial and Engineering Chemistry, 13(6), 613, 2002 |
| 7 |
Fouling of inorganic membrane and flux enhancement in membrane-coupled anaerobic bioreactor
Yoon SH, Kang IJ, Lee CH
Separation Science and Technology, 34(5), 709, 1999 |
| 8 |
Polypropylene과 Polyethylene으로 구성된 기공성 고분자 소재의 여과특성
안병길, 오경근, 최웅수, 권오관
Clean Technology, 4(2), 32, 1998 |
