| 1 |
입자상물질과 Ash양이 디젤매연여과장치 내의 배압 및 유동균일도에 미치는 영향
김윤지, 한단비, 서태원, 오광철, 백영순
Clean Technology, 26(1), 22, 2020 |
| 2 |
Numerical modeling of manifold design and flow uniformity analysis of an external manifold solid oxide fuel cell stack
Zhao C, Yang JJ, Zhang T, Yan D, Pu J, Chi B, Li J
International Journal of Hydrogen Energy, 45(28), 14440, 2020 |
| 3 |
A novel heat exchanger design procedure for photovoltaic panel cooling application: An analytical and experimental evaluation
Siddiqui MU, Siddiqui OK, Al-Sarkhi A, Arif AFM, Zubair SM
Applied Energy, 239, 41, 2019 |
| 4 |
CFD-DEM study of the effect of ring baffles on system performance of a full-loop circulating fluidized bed
Wang S, Luo K, Hu CS, Fan JR
Chemical Engineering Science, 196, 130, 2019 |
| 5 |
CFD에 의한 선박용 DPF/DOC내 배기가스의 유동 균일도 및 특성 연구
김윤지, 한단비, 백영순
Clean Technology, 25(2), 153, 2019 |
| 6 |
Numerical and experimental study of two-phase flow uniformity in channels of parallel PEM fuel cells with modified Z-type flow-fields
Ashrafi M, Kanani H, Shams M
Energy, 147, 317, 2018 |
| 7 |
Design of an innovative distributor to improve flow uniformity using cylindrical obstacles in header of a fuel cell
Dabiri S, Hashemi M, Rahimi M, Bahiraei M, Khodabandeh E
Energy, 152, 719, 2018 |
| 8 |
Why a more uniform fuel/oxygen distribution is critical for fuel cell stack performance improvement
Ni M
International Journal of Energy Research, 42(14), 4259, 2018 |
| 9 |
LES-DEM investigation of the timerelated solid phase properties and improvements of flow uniformity in a dualside refeed CFB
Wang S, Luo K, Yang SL, Hu CS, Fan JR
Chemical Engineering Journal, 313, 858, 2017 |
| 10 |
Closed-form correlations of pressure drop and thermal resistance for a plate fin heat sink with uniform air jet impingement
Kim TH, Do KH, Kim SJ
Energy Conversion and Management, 136, 340, 2017 |
