| 1 |
Numerical investigation of PM filtration in fluidized-bed-type PM removal device based on force balance via CFD-DEM simulation
Yokoo K, Kishida M, Yamamoto T
Powder Technology, 380, 506, 2021 |
| 2 |
Study on dry separation technology of a continuous gas-solid separation fluidized bed with a moving scraper (sic) - Separation performance
Lv B, Luo ZF, Deng XW, Chen JT, Fang CJ, Zhu XN
Powder Technology, 377, 565, 2021 |
| 3 |
Experimental study of hydrodynamics leading to estimation of acceleration length in a laboratory riser system using sand and limestone
Popuri AK, Garimella P
Chemical Engineering Communications, 206(4), 444, 2019 |
| 4 |
Bubble formation in continuous liquid phase under industrial jetting conditions
Xiao H, Geng SJ, Chen AQ, Yang C, Gao F, He TB, Huang QS
Chemical Engineering Science, 200, 214, 2019 |
| 5 |
Effects of needle orientation and gas velocity on water transport and removal in a modified PEMFC gas flow channel having a hydrophilic needle
Qin YZ, Yin Y, Jiao K, Du Q
International Journal of Energy Research, 43(7), 2538, 2019 |
| 6 |
Characteristic gas velocity and fluidization quality evaluation of vibrated dense medium fluidized bed for fine coal separation
Zhou EH, Zhang YD, Zhao YM, Luo ZF, He JF, Duan CL
Advanced Powder Technology, 29(4), 985, 2018 |
| 7 |
Tracking of particles using TFM in gas-solid fluidized beds
Banaei M, Jegers J, Annaland MV, Kuipers JAM, Deen NG
Advanced Powder Technology, 29(10), 2538, 2018 |
| 8 |
Evaluation of the separation performance of an air dense medium gas-solid fluidized bed for coal cleaning: Effect of the binary dense media
He JF, Zhao YM, Huang G, Liu CG
Advanced Powder Technology, 29(12), 3265, 2018 |
| 9 |
Shear rate and mass transfer coefficient in internal loop airlift reactors involving non-Newtonian fluids
Kumar N, Bansal A, Gupta R
Chemical Engineering Research & Design, 136, 315, 2018 |
| 10 |
Hydrodynamic and Heat Transfer Studies in Riser System for Waste Heat Recovery using Chalcopyrite
Popuri AK, Garimella P
Korean Chemical Engineering Research, 56(2), 252, 2018 |
