| 1 |
Polyaniline-Copper Composite: A Non-precious Metal Cathode Catalyst for Low-Temperature Fuel Cells
Sonawane JM, Pant D, Ghosh PC, Adeloju SB
Energy & Fuels, 35(4), 3385, 2021 |
| 2 |
Sizing of a fuel cell electric vehicle: A pinch analysis-based approach
Gaikwad SD, Ghosh PC
International Journal of Hydrogen Energy, 45(15), 8985, 2020 |
| 3 |
Optimization of contact resistance with better gasketing for a unitized regenerative fuel cell
Bhosale AC, Mahajan MA, Ghosh PC
International Journal of Hydrogen Energy, 44(37), 20953, 2019 |
| 4 |
Sizing of hybrid energy storage system for a PV based microgrid through design space approach
Jacob AS, Banerjee R, Ghosh PC
Applied Energy, 212, 640, 2018 |
| 5 |
Exploring the use of polyaniline-modified stainless steel plates as low-cost, high-performance anodes for microbial fuel cells
Sonawane JM, Al-Saadi S, Raman RKS, Ghosh PC, Adeloju SB
Electrochimica Acta, 268, 484, 2018 |
| 6 |
Electrokinetic behaviour of conducting polymer modified stainless steel anodes during the enrichment phase in microbial fuel cells
Sonawane JM, Ghosh PC, Adeloju SB
Electrochimica Acta, 287, 96, 2018 |
| 7 |
Catalytic ozone pretreatment of complex textile effluent using Fe2+ and zero valent iron nanoparticles
Malik SN, Ghosh PC, Vaidya AN, Mudliar SN
Journal of Hazardous Materials, 357, 363, 2018 |
| 8 |
Low-cost stainless-steel wool anodes modified with polyaniline and polypyrrole for high-performance microbial fuel cells
Sonawane JM, Patil SA, Ghosh PC, Adeloju SB
Journal of Power Sources, 379, 103, 2018 |
| 9 |
A new modified-serpentine flow field for application in high temperature polymer electrolyte fuel cell
Singdeo D, Dey T, Gaikwad S, Andreasen SJ, Ghosh PC
Applied Energy, 195, 13, 2017 |
| 10 |
Modeling and experimental validation of a unitized regenerative fuel cell in electrolysis mode of operation
Bhosale AC, Mane SR, Singdeo D, Ghosh PC
Energy, 121, 256, 2017 |
