| 1 |
Comprehensive assessment of the impact of operating parameters on sub 1 kW compact ORC performance
Jang Y, Lee J
Energy Conversion and Management, 182, 369, 2019 |
| 2 |
Correlations for estimating the specific capital cost of multi-effect distillation plants considering the main design trends and operating conditions
Kosmadakis G, Papapetrou M, Ortega-Delgado B, Cipollina A, Alarcon-Padilla DC
Desalination, 447, 74, 2018 |
| 3 |
An evolutionary keyhole-mode heat transfer model in continuous plasma arc welding
Li Y, Feng YH, Zhang XX, Wu CS
International Journal of Heat and Mass Transfer, 117, 1188, 2018 |
| 4 |
Effects of the generator and evaporator temperature differences on a double absorption heat transformer-Different control strategies on utilizing heat sources
Wang HZ, Li HS, Bu XB, Wang LB
Energy Conversion and Management, 138, 12, 2017 |
| 5 |
Solar driven air conditioning and refrigeration systems corresponding to various heating source temperatures
Wang RZ, Xu ZY, Pan QW, Du S, Xia ZZ
Applied Energy, 169, 846, 2016 |
| 6 |
Influence of the number of stages on the heat source temperature of desiccant wheel dehumidification systems using exergy analysis
Tu R, Liu XH, Jiang Y, Ma F
Energy, 85, 379, 2015 |
| 7 |
Optimal Heat Source Temperature for thermodynamic optimization of sub-critical Organic Rankine Cycles
Liu W, Meinel D, Gleinser M, Wieland C, Spliethoff H
Energy, 88, 897, 2015 |
| 8 |
Investigation of hydrofluoroolefins as potential working fluids in organic Rankine cycle for geothermal power generation
Liu W, Meinel D, Wieland C, Spliethoff H
Energy, 67, 106, 2014 |
| 9 |
Temperature distribution in a rectangular plate heated by a moving heat source
Kidawa-Kukla J
International Journal of Heat and Mass Transfer, 51(3-4), 865, 2008 |
