| 1 |
Influences of the operational variables on electrochemical treatment of chelated Cu(II) in alkaline solutions using a membrane cell
Eivazihollagh A, Backstrom J, Norgren M, Edlund H
Journal of Chemical Technology and Biotechnology, 92(6), 1436, 2017 |
| 2 |
Process optimization and modeling of heavy metals extraction from a molybdenum rich spent catalyst by Aspergillus niger using response surface methodology
Gholami RM, Mousavi SM, Borghei SM
Journal of Industrial and Engineering Chemistry, 18(1), 218, 2012 |
| 3 |
Selective recovery of copper, nickel and zinc from ashes produced from Saccharomyces cerevisiae contaminated biomass used in the treatment of real electroplating effluents
Machado MD, Soares EV, Soares HMVM
Journal of Hazardous Materials, 184(1-3), 357, 2010 |
| 4 |
Heavy metals recovery from industrial wastewater using Taguchi method
Kaminari NMS, Schultz DR, Ponte MJJS, Ponte HA, Marino CEB, Neto AC
Chemical Engineering Journal, 126(2-3), 139, 2007 |
| 5 |
Pyrolysis as a technique for separating heavy metals from hyperaccumulators. Part III: pilot-scale pyrolysis of synthetic hyperaccumulator biomass
Koppolu L, Prasad R, Clements LD
Biomass & Bioenergy, 26(5), 463, 2004 |
| 6 |
Pyrolysis as a technique for separating heavy metals from hyperaccumulators. Part 1: Preparation of synthetic hyperaccumulator biomass
Koppolu L, Clements LD
Biomass & Bioenergy, 24(1), 69, 2003 |
| 7 |
Pyrolysis as a technique for separating heavy metals from hyperaccumulators. Part II: Lab-scale pyrolysis of synthetic hyperaccumulator biomass
Koppolu L, Agblevor FA, Clements LD
Biomass & Bioenergy, 25(6), 651, 2003 |
