화학공학소재연구정보센터
검색결과 : 18건
No. Article
1 Study of the dimensional instabilities of laminated polypropylene films during heating treatments
Poncot M, Martin J, Hiver JM, Verchere D, Dahoun A
Journal of Applied Polymer Science, 125(5), 3385, 2012
2 Plastic Deformation of Low-Density Polyethylene Reinforced With Biodegradable Polylactide, Part 1: Microstructural Analysis and Tensile Behavior at Constant True Strain-Rate
Rezgui F, G'Sell C, Dahoun A, Hiver JM, Sadoun T
Polymer Engineering and Science, 51(1), 117, 2011
3 Plastic Deformation of Low-Density Polyethylene Reinforced With Biodegradable Polylactide, Part 2: Creep Characterization and Modeling
Rezgui F, G'Sell C, Dahoun A, Hiver JM, Sadoun T
Polymer Engineering and Science, 51(1), 126, 2011
4 Study of the Crystalline Phase Orientation in Uniaxially Stretched Polypropylene by Raman Spectroscopy: Validation and Use of a Time-Resolved Measurement Method
Martin J, Poncot M, Bourson P, Dahoun A, Hiver JM
Polymer Engineering and Science, 51(8), 1607, 2011
5 Characterization of Contamination Effects for Two Polypropylene-Based Materials
Pessey D, Bahlouli N, Raveyre C, Guillet J, Ahzi S, Hiver JM, Dahoun A
Polymer Engineering and Science, 50(1), 1, 2010
6 Thermooxidative Aging of Polyoxymethylene, Part 2: Embrittlement Mechanisms
Fayolle B, Verdu J, Piccoz D, Dahoun A, Hiver JM, G'sell C
Journal of Applied Polymer Science, 111(1), 469, 2009
7 Effect of Microstructure on Crazing Onset in Polyethylene Under Tension
Addiego F, Dahoun A, G'Sell C, Hiver JM, Godard O
Polymer Engineering and Science, 49(6), 1198, 2009
8 Dynamic mechanical properties and morphology of high-density polyethylene/CaCO3 blends with and without an impact modifier
Yang YL, G'Sell C, Hiver JM, Bai SL
Journal of Applied Polymer Science, 103(6), 3907, 2007
9 Characterization of volume strain at large deformation under uniaxial tension in high-density polyethylene
Addiego F, Dahoun A, G'Sell C, Hiver JM
Polymer, 47(12), 4387, 2006
10 Plastic deformation and damage of polyoxymethylene in the large strain range at elevated temperatures
Mohanraj J, Barton DC, Ward IM, Dahoun A, Hiver JM, G'Sell C
Polymer, 47(16), 5852, 2006