| 1 |
Investigation on Ash Slagging Characteristics During Combustion of Biomass Pellets and Effect of Additives
Wang L, Skjevrak G, Skreiberg O, Wu HW, Nielsen HK, Hustad JE
Energy & Fuels, 32(4), 4442, 2018 |
| 2 |
Investigation of Biomass Ash Sintering Characteristics and the Effect of Additives
Wang L, Skjevrak G, Hustad JE, Skreiberg O
Energy & Fuels, 28(1), 208, 2014 |
| 3 |
Sintering Characteristics and Mineral Transformation Behaviors of Corn Cob Ashes
Wang L, Hustad JE, Gronli M
Energy & Fuels, 26(9), 5905, 2012 |
| 4 |
Theoretical and experimental investigation of diesel engine performance, combustion and emissions analysis fuelled with the blends of ethanol, diesel and jatropha methyl ester
Kannan D, Pachamuthu S, Nabi MN, Hustad JE, Lovas T
Energy Conversion and Management, 53(1), 322, 2012 |
| 5 |
Influence of oxygenates on fine particle and regulated emissions from a diesel engine
Nabi MN, Hustad JE
Fuel, 93(1), 181, 2012 |
| 6 |
Sintering characteristics of sewage sludge ashes at elevated temperatures
Wang L, Skjevrak G, Hustad JE, Gronli MG
Fuel Processing Technology, 96, 88, 2012 |
| 7 |
Modeling and simulation of catalytic partial oxidation of methane to synthesis gas by using a plasma-assisted gliding arc reactor
Rafiq MH, Jakobsen HA, Hustad JE
Fuel Processing Technology, 101, 44, 2012 |
| 8 |
Effects of Sewage Sludge and Marble Sludge Addition on Slag Characteristics during Wood Waste Pellets Combustion
Wang L, Skjevrak G, Hustad JE, Gronli MG
Energy & Fuels, 25(12), 5775, 2011 |
| 9 |
Experimental studies and modeling of a fixed bed reactor for Fischer-Tropsch synthesis using biosyngas
Rafiq MH, Jakobsen HA, Schmid R, Hustad JE
Fuel Processing Technology, 92(5), 893, 2011 |
| 10 |
Synthesis Gas from Methane by Using a Plasma-Assisted Gliding Arc Catalytic Partial Oxidation Reactor
Rafiq MH, Hustad JE
Industrial & Engineering Chemistry Research, 50(9), 5428, 2011 |
