| 1 |
Material specific drying kinetics in fluidized bed drying under mechanical vibration using the reaction engineering approach
Lehmann SE, Oesau T, Jongsma A, Innings F, Heinrich S
Advanced Powder Technology, 31(12), 4699, 2020 |
| 2 |
Modified surfaces to enhance vertical falling film heat transfer - An experimental and numerical study
Akesjo A, Gourdon M, Vamling L, Innings F, Sasic S
International Journal of Heat and Mass Transfer, 131, 237, 2019 |
| 3 |
Droplet collisions of water and milk in a spray with Langevin turbulence dispersion
Finotello G, Padding JT, Buist KA, Jongsma A, Innings F, Kuipers JAM
International Journal of Multiphase Flow, 114, 154, 2019 |
| 4 |
Fluidization characteristics of cohesive powders in vibrated fluidized bed drying at low vibration frequencies
Lehmann SE, Hartge EU, Jongsma A, deLeeuw IM, Innings F, Heinrich S
Powder Technology, 357, 54, 2019 |
| 5 |
Local levels of dissipation rate of turbulent kinetic energy in a rotor-stator mixer with different stator slot widths-An experimental investigation
Mortensen HH, Innings F, Hakansson A
Chemical Engineering Research & Design, 130, 52, 2018 |
| 6 |
A validation of commonly used CFD methods applied to rotor stator mixers using PIV measurements of fluid velocity and turbulence
Mortensen HH, Arlov D, Innings F, Hakansson A
Chemical Engineering Science, 177, 340, 2018 |
| 7 |
Single droplet breakup in a rotor-stator mixer
Ashar M, Arlov D, Carlsson F, Innings F, Andersson R
Chemical Engineering Science, 181, 186, 2018 |
| 8 |
Experimental and numerical study of heat transfer in a large-scale vertical falling film pilot unit
Akesjo A, Gourdon M, Vamling L, Innings F, Sasic S
International Journal of Heat and Mass Transfer, 125, 53, 2018 |
| 9 |
Hydrodynamic Difference between Inline and Batch Operation of a Rotor-Stator Mixer Head - A CFD Approach
Hakansson A, Arlov D, Carlsson F, Innings F
Canadian Journal of Chemical Engineering, 95(4), 806, 2017 |
| 10 |
The dissipation rate of turbulent kinetic energy and its relation to pumping power in inline rotor-stator mixers
Hakansson A, Innings F
Chemical Engineering and Processing, 115, 46, 2017 |
