검색결과 : 32건
| No. | Article |
|---|---|
| 1 |
Low-temperature stiffening of air plasma-sprayed 7 wt% Y2O3-stabilized ZrO2 Lal D, Kumar P, Sampath S, Jayaram V Journal of the American Ceramic Society, 103(3), 2076, 2020 |
| 2 |
Effect of hydrogen addition on criteria and greenhouse gas emissions for a marine diesel engine Pan HS, Pournazeri S, Princevac M, Miller JW, Mahalingam S, Khan MY, Jayaram V, Welch WA International Journal of Hydrogen Energy, 39(21), 11336, 2014 |
| 3 |
Effect of Zirconium on the Densification of Reactively Hot-Pressed Zirconium Carbide Chakrabarti T, Rangaraj L, Jayaram V Journal of the American Ceramic Society, 97(10), 3092, 2014 |
| 4 |
Role of interface curvature on stress distribution under indentation for ZrN/Zr multilayer coating Verma N, Jayaram V Thin Solid Films, 571, 283, 2014 |
| 5 |
Effect of high-temperature shock-wave compression on few-layer MoS2, WS2 and MoSe2 Vasu K, Matte HSSR, Shirodkar SN, Jayaram V, Reddy KPJ, Waghmare UV, Rao CNR Chemical Physics Letters, 582, 105, 2013 |
| 6 |
COMPARATIVE EVALUATION OF THERMAL CONDUCTIVITY OF ZIRCONIA SOLID AND HONEYCOMB STRUCTURES Saha BP, Johnson R, Jayaram V Experimental Heat Transfer, 25(4), 267, 2012 |
| 7 |
Friction between a Steel Ball and a Steel Flat Lubricated by MoS2 Particles Suspended in Hexadecane at 150 degrees C Praveena M, Jayaram V, Biswas SK Industrial & Engineering Chemistry Research, 51(38), 12321, 2012 |
| 8 |
The influence of Zr layer thickness on contact deformation and fracture in a ZrN-Zr multilayer coating Verma N, Jayaram V Journal of Materials Science, 47(4), 1621, 2012 |
| 9 |
Reactive Pulsed Laser Deposition of titanium nitride thin film: Optimization of process parameters using Secondary Ion Mass Spectrometry Krishnan R, Mathews T, Balamurugan AK, Dash S, Tyagi AK, Raj B, Jayaram V Applied Surface Science, 256(10), 3077, 2010 |
| 10 |
Studies on electrodeposition of Fe-W alloys for fuel cell applications (vol 253, pg 2031, 2006) Tharamani CN, Bera P, Jayaram V, Begum NS, Mayanna SM Applied Surface Science, 256(11), 3704, 2010 |