검색결과 : 16건
| No. | Article |
|---|---|
| 1 |
Inertial measurement unit as a tool within dense phase pneumatic conveying. Investigation into velocity measurement accuracy, pressure and velocity relationships in slug flow Lavrinec A, Orozovic O, Rajabnia H, Williams K, Jones MG, Klinzing G Powder Technology, 382, 454, 2021 |
| 2 |
Velocity and porosity relationships within dense phase pneumatic conveying as studied using coupled CFD-DEM Lavrinec A, Orozovic O, Rajabnia H, Williams K, Jones MG, Klinzing G Powder Technology, 375, 89, 2020 |
| 3 |
Observations of dense phase pneumatic conveying using an inertial measurement unit Lavrinec A, Orozovic O, Williams K, Jones MG, Klinzing G, Clark W, Wang Z Powder Technology, 343, 436, 2019 |
| 4 |
On the kinematics of horizontal slug flow pneumatic conveying and the relationship between slug length, porosity, velocities and stationary layers Orozovic O, Lavrinec A, Alkassar Y, Williams K, Jones MG, Klinzing G Powder Technology, 351, 84, 2019 |
| 5 |
Cover Story A Primer on Gas-Solids Fluidization Dhodapkar S, Zaltash A, Klinzing G Chemical Engineering, 119(8), 38, 2012 |
| 6 |
Friction forces on plugs of coarse particles moving upwards in a vertical column Rabinovich E, Freund N, Kalman H, Klinzing G Powder Technology, 219, 143, 2012 |
| 7 |
Using Inserts to Address Solids Flow Problems Bates L, Dhodapkar S, Klinzing G Chemical Engineering, 117(7), 32, 2010 |
| 8 |
Understanding Bends In Pneumatic Conveying Systems Dhodapkar S, Solt P, Klinzing G Chemical Engineering, 116(4), 53, 2009 |
| 9 |
Introduction to the WCPT5 special issue of powder technology Tuzun U, Klinzing G Powder Technology, 179(3), 102, 2008 |
| 10 |
Dry screening: Sorting out the basic concepts Dhodapkar S, Bates L, Klinzing G Chemical Engineering, 114(9), 56, 2007 |