| 1 |
Evaluation of Electrospun Fibrous Mats Targeted for Use as Flow Battery Electrodes
Liu S, Kok M, Kim Y, Barton JL, Brushett FR, Gostick J
Journal of the Electrochemical Society, 164(9), A2038, 2017 |
| 2 |
Using horizon estimation and nonlinear optimization for grey-box identification
Isaksson AJ, Sjoberg J, Tornqvist D, Ljung L, Kok M
Journal of Process Control, 30, 69, 2015 |
| 3 |
Flexible and stretchable electronics for wearable health devices
van den Brand J, de Kok M, Koetse M, Cauwe M, Verplancke R, Bossuyt F, Jablonski M, Vanfleteren J
Solid-State Electronics, 113, 116, 2015 |
| 4 |
The evaluation of hierarchical structured superhydrophobic coatings for the alleviation of insect residue to aircraft laminar flow surfaces
Kok M, Young TM
Applied Surface Science, 314, 1053, 2014 |
| 5 |
Isothermal oxidation study on NiMnGa ferromagnetic shape memory alloy at 600-1000 degrees C
Kok M, Pirge G, Aydogdu Y
Applied Surface Science, 268, 136, 2013 |
| 6 |
Effect of heat treatment on the physical properties of Ni-Mn-Ga alloy
Kok M, Aydogdu Y
Thermochimica Acta, 548, 51, 2012 |
| 7 |
Tuning the colour of white polymer light emitting diodes
de Kok M, Sarfert W, Paetzold R
Thin Solid Films, 518(18), 5265, 2010 |
| 8 |
Synthesis of electron-rich versus electron-poor poly {[1,4-phenylene]-[1-(n-alkylsulfinyl)ethylene]}s via the sulfinyl precursor route in different organic solvents
Adriaensens P, Van der Borght M, Hontis L, Issaris A, van Breemen A, de Kok M, Vanderzande D, Gelan J
Polymer, 41(19), 7003, 2000 |
