검색결과 : 11건
No. | Article |
---|---|
1 |
Viscoelastic liquid bridge breakup and liquid transfer between two surfaces Chen H, Ponce-Torres A, Montanero JM, Amirfazli A Journal of Colloid and Interface Science, 582, 1251, 2021 |
2 |
INFLUENCE OF ENERGY EXCHANGE BETWEEN AIR AND LIQUID STREAMS ON SPRAY CHARACTERISTICS AND ATOMIZATION EFFICIENCY OF WATER-AIR IMPINGING JETS Xia Y, Khezzar L, Hardalupas Y, Alshehhi M Atomization and Sprays, 29(8), 677, 2019 |
3 |
Primary breakup dynamics and spray characteristics of a rotary atomizer with radial-axial discharge channels Rezayat S, Farshchi M, Ghorbanhoseini M International Journal of Multiphase Flow, 111, 315, 2019 |
4 |
An experimental analysis of the spraying processes in improved design of effervescent atomizer Zaremba M, Kozak J, Maly M, Weiss L, Rudolf P, Jedelsky J, Jicha M International Journal of Multiphase Flow, 103, 1, 2018 |
5 |
Galinstan liquid metal breakup and droplet formation in a shock-induced cross-flow Chen Y, Wagner JL, Farias PA, DeMauro EP, Guildenbecher DR International Journal of Multiphase Flow, 106, 147, 2018 |
6 |
Low-pressure twin-fluid atomization: Effect of mixing process on spray formation Zaremba M, Weiss L, Maly M, Wensing M, Jedelsky J, Jicha M International Journal of Multiphase Flow, 89, 277, 2017 |
7 |
Droplet dynamics and size characterization of high-velocity airblast atomization Urban A, Zaremba M, Maly M, Jozsa V, Jedelsky J International Journal of Multiphase Flow, 95, 1, 2017 |
8 |
Spray flame structure in conventional and hot-diluted combustion regime Rodrigues HC, Tummers MJ, van Veen EH, Roekaerts DJEM Combustion and Flame, 162(3), 759, 2015 |
9 |
Twin-fluid atomization of viscous liquids: The effect of atomizer construction on breakup process, spray stability and droplet size Mlkvik M, Stahle P, Schuchmann HP, Gaukel V, Jedelsky J, Jicha M International Journal of Multiphase Flow, 77, 19, 2015 |
10 |
HIGH-FIDELITY SIMULATION OF FUEL ATOMIZATION IN A REALISTIC SWIRLING FLOW INJECTOR Li XY, Soteriou MC Atomization and Sprays, 23(11), 1049, 2013 |