| 1 |
Experimental study of transient liquid nitrogen jet impingement boiling on concrete surface using inverse conduction problem algorithm
Shao XY, Pu L, Tang X, Yang SY, Lei G, Li YZ
Process Safety and Environmental Protection, 147, 45, 2021 |
| 2 |
On the critical conditions for pool-fire puffing
Moreno-Boza D, Coenen W, Carpio J, Sanchez AL, Williams FA
Combustion and Flame, 192, 426, 2018 |
| 3 |
Aqueous ionic liquid solutions for boiling heat transfer enhancement in the absence of buoyancy induced bubble departure
Kumar N, Raza MQ, Seth D, Raj R
International Journal of Heat and Mass Transfer, 122, 354, 2018 |
| 4 |
Application of a Liquid Nitrogen Direct Jet System to the Extinguishment of Oil Pool Fires in Open Space
Shi BB, Zhou FB
Process Safety Progress, 36(2), 165, 2017 |
| 5 |
High-order perturbation solutions to a LH2 spreading model with continuous spill
Kim M, Do K, Choi B, Han Y
International Journal of Hydrogen Energy, 37(22), 17409, 2012 |
| 6 |
First-order perturbation solutions of liquid pool spreading with vaporization
Kim M, Do K, Choi B, Han Y
International Journal of Hydrogen Energy, 36(4), 3268, 2011 |
| 7 |
Molecular weight distribution broadening of polypropylene by periodic switching of hydrogen and catalyst additions
Ali MAH, Stroomer J, Betlem B, Weickert G, Roffel B
Journal of Applied Polymer Science, 108(4), 2446, 2008 |
| 8 |
Calculation of solidification during continuous casting and its experimental verification
Fehervari G
Materials Science Forum, 473-474, 329, 2005 |
| 9 |
Polymerization of liquid propylene with a fourth generation Ziegler-Natta catalyst: Influence of temperature, hydrogen, monomer concentration, and prepolymerization method on powder morphology
Pater JTM, Weickert G, van Swaaij WPM
Journal of Applied Polymer Science, 87(9), 1421, 2003 |
| 10 |
Analysis of the effect of casting parameters on continuous steel casting
Fehervari G, Reger M, Vero B
Materials Science Forum, 414-4, 395, 2003 |
