| 1 |
Predicting the loading ratio and optimum extractant concentration for solvent extraction
DeSimone D, Counce R, Watson J
Chemical Engineering Research & Design, 161, 271, 2020 |
| 2 |
Optimization of inverter loading ratio for grid connected photovoltaic systems
Deschamps EM, Ruther R
Solar Energy, 179, 106, 2019 |
| 3 |
A comprehensive study on equilibrium and kinetics of morpholine extraction from aqueous stream with CA in toluene: Experimental evaluation, extraction model and parametric optimization employing desirability function
Kumari A, Karuna B, Satyavathi B
Chemical Engineering Research & Design, 133, 243, 2018 |
| 4 |
Practical moisture buffering effect of three hygroscopic materials in real-world conditions
Zhang HB, Yoshino H, Hasegawa K, Liu J, Zhang WR, Xuan H
Energy and Buildings, 139, 214, 2017 |
| 5 |
Pneumatic transport characteristics of coarse size pulverized coal for the application of fast circulating fluidized bed gasification
Lee JW, Chung SW, Ryu SO, Lee JE, Yun Y, Lee C, Kim Y, Lim S
Korean Journal of Chemical Engineering, 34(1), 54, 2017 |
| 6 |
Impact of inverter loading ratio on solar photovoltaic system performance
Good J, Johnson JX
Applied Energy, 177, 475, 2016 |
| 7 |
Investigation of Impingement Heat Transfer for Air-Sand Mixture Flow
Al-Dulaimi MJ, Rasool AAA, Hamad FA
Canadian Journal of Chemical Engineering, 94(1), 134, 2016 |
| 8 |
Microbial community structure and function in response to the shift of sulfide/nitrate loading ratio during the denitrifying sulfide removal process
Huang C, Li ZL, Chen F, Liu Q, Zhao YK, Zhou JZ, Wang AJ
Bioresource Technology, 197, 227, 2015 |
| 9 |
Modelling fluidized dense-phase pneumatic conveying of fly ash
Setia G, Mallick SS
Powder Technology, 270, 39, 2015 |
| 10 |
On improving solid friction factor modeling for fluidized dense-phase pneumatic conveying systems
Setia G, Mallick SS, Wypych PW
Powder Technology, 257, 88, 2014 |
