| 1 |
A heat-transfer model for tube fouling in the radiant section of once-through steam generators
Herman SD, Mehrotra AK
Canadian Journal of Chemical Engineering, 99(3), 789, 2021 |
| 2 |
A review of heat-transfer mechanism for solid deposition from "waxy" or paraffinic mixtures
Mehrotra AK, Ehsani S, Haj-Shafiei S, Kasumu AS
Canadian Journal of Chemical Engineering, 98(12), 2463, 2020 |
| 3 |
Investigating the gelling behaviour of 'waxy' paraffinic mixtures during flow shutdown
Ehsani S, Mehrotra AK
Canadian Journal of Chemical Engineering, 98(12), 2618, 2020 |
| 4 |
Deposition from "Waxy" Mixtures in a Flow-Loop Apparatus under Turbulent Conditions: Investigating the Effect of Suspended Wax Crystals under Cold Flow Conditions (vol 97, pg 2740, 2019)
Ehsani S, Haj-Shafiei S, Mehrotra AK
Canadian Journal of Chemical Engineering, 98(9), 2052, 2020 |
| 5 |
Deposition from waxy mixtures in a flow-loop apparatus under turbulent conditions: Investigating the effect of suspended wax crystals in cold flow regime
Ehsani S, Haj-Shafiei S, Mehrotra AK
Canadian Journal of Chemical Engineering, 97(10), 2740, 2019 |
| 6 |
Validating Heat-Transfer-Based Modeling Approach for Wax Deposition from Paraffinic Mixtures: An Analogy with Ice Deposition
Ehsani S, Mehrotra AK
Energy & Fuels, 33(3), 1859, 2019 |
| 7 |
Experiments and modeling for investigating the effect of suspended wax crystals on deposition from 'waxy' mixtures under cold flow conditions
Ehsani S, Haj-Shafiei S, Mehrotra AK
Fuel, 243, 610, 2019 |
| 8 |
Achieving cold flow conditions for 'waxy' mixtures with minimum solid deposition
Haj-Shafiei S, Mehrotra AK
Fuel, 235, 1092, 2019 |
| 9 |
Investigation of wax deposit "sloughing' from paraffinic mixtures in pipe flow
Sinha C, Mehrotra AK
Canadian Journal of Chemical Engineering, 96(1), 377, 2018 |
| 10 |
Solids Deposition from Wax-Solvent-Water "Waxy" Mixtures Using a Cold Finger Apparatus
Kasumu AS, Mehrotra AK
Energy & Fuels, 29(2), 501, 2015 |
