| 1 |
Advanced injection molding mold and molding process for improvement of weld line strengths and isotropy of glass fiber filled aromatic polyester LCP
Koponen M, Enqvist J, Nguyen-Chung T, Mennig G
Polymer Engineering and Science, 48(4), 711, 2008 |
| 2 |
Effect of mold temperature on the long-term viscoelastic behavior of polybutylene terepthalate
Banik K, Mennig G
Polymer Engineering and Science, 48(5), 957, 2008 |
| 3 |
The role of interface modification on the mechanical properties of injection-moulded composites from commingled polypropylene/banana granules
Paul SA, Reussmann T, Mennig G, Lampke T, Pothen LA, Mathew GDG, Joseph K, Thomas S
Composite Interfaces, 14(7-9), 849, 2007 |
| 4 |
Influence of mold temperature on the internal structure and creep variation in the thickness direction of sPS injection moldings
Banik K, Mennig G
International Polymer Processing, 22(4), 346, 2007 |
| 5 |
Process-induced long-term deformation behavior of semicrystalline PBT
Banik K, Mennig G
Polymer Engineering and Science, 46(7), 882, 2006 |
| 6 |
Effect of an obstacle during processing on the weld line of injection-molded glassy polystyrene: Microhardness study
Nguyen-Chung T, Mennig G, Boyanova M, Fakirov S, Calleja FJB
Journal of Applied Polymer Science, 92(5), 3362, 2004 |
| 7 |
Proper simulation of fibre reinforcement
Schmachtenberg E, Brandt M, Mennig G, Roth S, Renz R, Soos E, Kuster B, Sura H
Kunststoffe-Plast Europe, 94(5), 94, 2004 |
| 8 |
Thermoplastic elastomer from rubber crumb and polypropylene
Wiessner S, Michael H, Mennig G
Kautschuk Gummi Kunststoffe, 56(10), 514, 2003 |
| 9 |
Morphology and mechanical properties of elastomeric alloys from rubber crumb and thermoplastics
Scholz H, Potschke P, Michael H, Mennig G
Kautschuk Gummi Kunststoffe, 55(11), 584, 2002 |
| 10 |
Non-isothermal transient flow and molecular orientation during injection mold filling
Nguyen-Chung T, Mennig G
Rheologica Acta, 40(1), 67, 2001 |
