1 |
Direct production of hydrogen-rich gas and/or pure-hydrogen with high-pressure from alcohol/water/metal-powder mixture at low processing temperature Deguchi S, Kobayashi N, Isu N, Ito M International Journal of Hydrogen Energy, 45(4), 2513, 2020 |
2 |
Adhesion effects on spreading of metal powders in selective laser melting Wang L, Li EL, Shen H, Zou RP, Yu AB, Zhou ZY Powder Technology, 363, 602, 2020 |
3 |
Numerical simulation of high-pressure gas atomization of two-phase flow: Effect of gas pressure on droplet size distribution Arachchilage KH, Haghshenas M, Park S, Zhou L, Sohn Y, McWilliams B, Cho K, Kumar R Advanced Powder Technology, 30(11), 2726, 2019 |
4 |
Synthesis and exothermic reactions of ultra-fine snowman-shaped particles with directly bonded Ni/Al interfaces Kwon GH, Kim KT, Kim DW, Choe J, Yun JY, Kim JM Applied Surface Science, 476, 481, 2019 |
5 |
Fe-계 연자성 금속분말을 이용한 940 MHz 단거리 전용 통신 (DSRC) 대역 전파 흡수체 김병철, 서만철, 윤여춘 Korean Journal of Materials Research, 29(6), 363, 2019 |
6 |
Determining the density distribution in cemented carbide powder compacts using 3D neutron imaging Staf H, Kis Z, Szentmiklosi L, Kaplan B, Olsson E, Larsson PL Powder Technology, 354, 584, 2019 |
7 |
Fine spherical powder production during gas atomization of pressurized melts through melt nozzles with a small inner diameter Li XG, Zhu Q, Shu S, Fan JZ, Zhang SM Powder Technology, 356, 759, 2019 |
8 |
A numerical simulation study of the path-resolved breakup behaviors of molten metal in high-pressure gas atomization: With emphasis on the role of shock waves in the gas/molten metal interaction Kaiser R, Li C, Yang S, Lee D Advanced Powder Technology, 29(3), 623, 2018 |
9 |
An investigation into the parameters affecting the breakdown voltage and inter-particle bonding in the electrical discharge compaction of metal powders Darvizeh A, Alitavoli M, Namazi N Advanced Powder Technology, 29(10), 2346, 2018 |
10 |
Energetic and ecological effect of small amount of metalline powders used for doping waste-derived fuels Egorov RI, Valiullin TR, Strizhak PA Combustion and Flame, 193, 335, 2018 |