| 1 |
Influence of boron content on the microstructure and tribological properties of Cr-B-N coatings in water lubrication
Ma Q, Zhou F, Gao S, Wu ZW, Wang QZ, Chen KM, Zhou ZF, Li LKY
Applied Surface Science, 377, 394, 2016 |
| 2 |
Corrosion behaviors of TiN and Ti-Si-N (with 2.9 at.% and 5.0 at.% Si) coatings by electrochemical impedance spectroscopy
Wan Q, Ding H, Yousaf MI, Chen YM, Liu HD, Hu LW, Yang B
Thin Solid Films, 616, 601, 2016 |
| 3 |
Hard Cr-Al-Si-B-(N) coatings deposited by reactive and non-reactive magnetron sputtering of CrAlSiB target
Kiryukhantsev-Korneev PV, Pierson JF, Kuptsov KA, Shtansky DV
Applied Surface Science, 314, 104, 2014 |
| 4 |
Influence of Zr alloying on the mechanical properties, thermal stability and oxidation resistance of Cr-Al-N coatings
Li WZ, Chen QZ, Polcar T, Serra R, Cavaleiro A
Applied Surface Science, 317, 269, 2014 |
| 5 |
Influence of niobium addition on microstructure, mechanical properties and oxidation resistance of ZrN coatings
Wu ZT, Qi ZB, Jiang WF, Wang ZC, Liu B
Thin Solid Films, 570, 256, 2014 |
| 6 |
Character and chemical-wear response of high alloy austenitic stainless steel (Ortron 90) surface engineered with magnetron sputtered Cr-B-N ternary alloy coatings
Mallia B, Stuber M, Dearnley PA
Thin Solid Films, 549, 216, 2013 |
| 7 |
Nanostructure transition in Cr-C-N coatings deposited by pulsed closed field unbalanced magnetron sputtering
Wu ZL, Lin J, Moore JJ, Lei MK
Thin Solid Films, 520(13), 4264, 2012 |
| 8 |
Microstructure and mechanical properties of reactive magnetron sputtered Ti-B-C-N nanocomposite coatings
Luo QH, Lu YH
Applied Surface Science, 258(3), 1021, 2011 |
| 9 |
Analysis on the corrosion behavior of DC53 tool steel coated by Ti-Al-C-N films via filtered cathodic arc deposition
Hsu CH, Lee CY, Lee CC
Thin Solid Films, 517(17), 5212, 2009 |
| 10 |
Determination of residual stresses in cathodic arc coatings by means of the parallel beam glancing X-ray diffraction technique
Moreno CM, Sanchez JM, Ardila LC, Aldareguia JMM
Thin Solid Films, 518(1), 206, 2009 |
