| 1 |
Online measurement of dissolved carbon monoxide concentrations reveals critical operating conditions in gas fermentation experiments
Mann M, Miebach K, Buchs J
Biotechnology and Bioengineering, 118(1), 253, 2021 |
| 2 |
Discrimination between Single Crystals andAgglomerates during the Crystallization Process
Heisel S, Rolfes M, Wohlgemuth K
Chemical Engineering & Technology, 41(6), 1218, 2018 |
| 3 |
Novel technique for high throughput measurement of active monooxygenase concentration
Welters T, Horn T, Ruff AJ, Schwaneberg U, Buchs J
Biotechnology and Bioengineering, 114(4), 929, 2017 |
| 4 |
Online in situ viscosity determination in stirred tank reactors by measurement of the heat transfer capacity
Wunderlich M, Trampnau PP, Lopes EF, Buchs J, Regestein L
Chemical Engineering Science, 152, 116, 2016 |
| 5 |
Experimental assessment of the degree of hydrogen loading for the dibenzyl toluene based LOHC system
Muller K, Aslam R, Fischer A, Stark K, Wasserscheid P, Arlt W
International Journal of Hydrogen Energy, 41(47), 22097, 2016 |
| 6 |
Impact of butyric acid on butanol formation by Clostridium pasteurianum
Regestein L, Doerr EW, Staaden A, Rehmann L
Bioresource Technology, 196, 153, 2015 |
| 7 |
Experimental study by online measurement of the precipitation of nickel hydroxide: Effects of operating conditions
E WW, Cheng JC, Yang C, Mao ZS
Chinese Journal of Chemical Engineering, 23(5), 860, 2015 |
| 8 |
Process monitoring and control for constant separation conditions in centrifugal classification of fine particles
Konrath M, Hackbarth M, Nirschl H
Advanced Powder Technology, 25(3), 991, 2014 |
| 9 |
Visualization of surface deformations during thin film drying using a Digital-Image-Correlation method
Krenn J, Scharfer P, Schabel W
Chemical Engineering and Processing, 50(5-6), 569, 2011 |
| 10 |
Ultrasound spectroscopy and electrical resistance tomography for online characterisation of concentrated emulsions in crossflow membrane emulsifications
Liu L, Li RF, Collins S, Wang XZ, Tweedie R, Primrose K
Powder Technology, 213(1-3), 123, 2011 |
