| 1 |
Effect of inclination on the thermal response of composite phase change materials for thermal energy storage
Yang XH, Guo ZX, Liu YH, Jin LW, He YL
Applied Energy, 238, 22, 2019 |
| 2 |
Thermal response of annuli filled with metal foam for thermal energy storage: An experimental study
Yang XH, Wei P, Cui X, Jin LW, He YL
Applied Energy, 250, 1457, 2019 |
| 3 |
Comparison of direct numerical simulation with volume-averaged method on composite phase change materials for thermal energy storage
Yang XH, Bai QS, Guo ZX, Niu ZY, Yang C, Jin LW, Lu TJ, Yan JY
Applied Energy, 229, 700, 2018 |
| 4 |
Development of a heat transport model for open-cell metal foams with high cell densities
Aghaei P, Visconti CG, Groppi G, Tronconi E
Chemical Engineering Journal, 321, 432, 2017 |
| 5 |
Comparison of metal foam heat exchangers to a finned heat exchanger for low Reynolds number applications
Huisseune H, De Schampheleire S, Ameel B, De Paepe M
International Journal of Heat and Mass Transfer, 89, 1, 2015 |
| 6 |
Experimental validation of simplified conduction-radiation models for evaluation of Effective Thermal Conductivity of open-cell metal foams at high temperatures
Mendes MAA, Skibina V, Talukdar P, Wulf R, Gross U, Trimis D, Ray S
International Journal of Heat and Mass Transfer, 78, 112, 2014 |
| 7 |
Thermo-fluidic characteristics of open cell metal foam as an anodes for DCFC, part I: Head loss coefficient of metal foam
Kim TH, Lee W, Jeong JH
International Journal of Hydrogen Energy, 39(23), 12369, 2014 |
| 8 |
Effect of the Holding Temperature and Vacuum Pressure for the Open Cell Mg Alloy Foams
Yue XZ, Hur BY
Korean Journal of Materials Research, 22(6), 309, 2012 |
