1 |
Optical response of ultra-thin titanium nitride films on brass and gold plated brass surfaces Shankernath V, Naidu KL, Krishna MG, Padmanabhan KA Materials Research Bulletin, 85, 121, 2017 |
2 |
On the experimental validation of a mesoscopic grain boundary sliding-controlled flow model for structural superplasticity Sripathi S, Padmanabhan KA Journal of Materials Science, 49(1), 199, 2014 |
3 |
Effect of Nb concentration on the structure, mechanical, optical, and electrical properties of nano-crystalline Ti1-xNbxN thin films Vasu K, Krishna MG, Padmanabhan KA Journal of Materials Science, 47(8), 3522, 2012 |
4 |
Substrate-temperature dependent structure and composition variations in RF magnetron sputtered titanium nitride thin films Vasu K, Krishna MG, Padmanabhan KA Applied Surface Science, 257(7), 3069, 2011 |
5 |
Microstructure evolution and hardness variation during annealing of equal channel angular pressed ultra-fine grained nickel subjected to 12 passes Raju KS, Krishna MG, Padmanabhan KA, Sarma VS, Gurao NP, Wilde G Journal of Materials Science, 46(8), 2662, 2011 |
6 |
Conductive-atomic force microscopy study of local electron transport in nanostructured titanium nitride thin films Vasu K, Krishna MG, Padmanabhan KA Thin Solid Films, 519(22), 7702, 2011 |
7 |
Grain boundary sliding controlled flow and its relevance to superplasticity in metals, alloys, ceramics and intermetallics and strain-rate dependent flow in nanostructured materials Padmanabhan KA Journal of Materials Science, 44(9), 2226, 2009 |
8 |
Growth, surface morphology, optical properties and electrical resistivity of epsilon-TiNx (0.4 <= x <= 0.5) films Kiran MSRN, Krishna MG, Padmanabhan KA Applied Surface Science, 255(5), 1934, 2008 |
9 |
Microstructural changes accompanying high strain amplitude fatigue tests on a multiphase medium carbon microalloyed steel Sankaran S, Sangal GS, Padmanabhan KA Journal of Materials Science, 40(2), 499, 2005 |
10 |
Micro-indentation creep of porous nanocrystalline metallic and composite compacts Padmanabhan KA, Mondal P, Hahn H Journal of Materials Science, 40(23), 6113, 2005 |