| 1 |
Experimental study on spatiotemporal distribution and variation characteristics of temperature in an open cathode proton exchange membrane fuel cell stack
Jian QF, Zhao J
International Journal of Hydrogen Energy, 44(49), 27079, 2019 |
| 2 |
Setup and experimental validation of a 5 kW HT-PEFC stack
Janssen H, Luke L, Lehnert W, Stolten D
International Journal of Hydrogen Energy, 42(16), 11596, 2017 |
| 3 |
Natural convection in high temperature flat plate latent heat thermal energy storage systems
Vogel J, Felbinger J, Johnson M
Applied Energy, 184, 184, 2016 |
| 4 |
Gas-Liquid mass transfer in a rotor-stator spinning disc reactor: Experimental study and correlation
Haseidl F, Pottbacker J, Hinrichsen O
Chemical Engineering and Processing, 104, 181, 2016 |
| 5 |
Theoretical study of the influence of material parameters on the performance of a polymer electrolyte fuel cell
Karpenko-Jereb L, Sternig C, Fink C, Hacker V, Theiler A, Tatschl R
Journal of Power Sources, 297, 329, 2015 |
| 6 |
Design and demonstration of an ethanol fuel processor for HT-PEM fuel cell applications
Gardemann U, Steffen M, Heinzel A
International Journal of Hydrogen Energy, 39(31), 18135, 2014 |
| 7 |
Analysis and optimization of relevant parameters of blade coating and gravure printing processes for the fabrication of highly efficient organic solar cells
Schneider A, Traut N, Hamburger M
Solar Energy Materials and Solar Cells, 126, 149, 2014 |
| 8 |
Parameter study of a kinetic-frictional continuum model of a disk impeller high-shear granulator
Abrahamsson PJ, Bjorn IN, Rasmuson A
Powder Technology, 238, 20, 2013 |
| 9 |
Parameter study on performance of building cooling by night-time ventilation
Artmann N, Manz H, Heiselberg P
Renewable Energy, 33(12), 2589, 2008 |
| 10 |
Systematic parameter study for ultra-fine fiber fabrication via electrospinning process
Tan SH, Inai R, Kotaki M, Ramakrishna S
Polymer, 46(16), 6128, 2005 |
