| 1 |
Study of the influence of adding styrene-ethylene/butadiene-styrene in acrylonitrile-butadiene-styrene and polyethylene blends
Peydro MA, Parres F, Navarro R, Sanchez-Caballero S
Polymer Engineering and Science, 54(6), 1313, 2014 |
| 2 |
Study of rheological, thermal, and mechanical behavior of reprocessed polyamide 6
Crespo JE, Parres F, Peydro MA, Navarro R
Polymer Engineering and Science, 53(4), 679, 2013 |
| 3 |
Process behavior of compatible polymer blends
Navarro R, Lopez J, Parres F, Ferrandiz S
Journal of Applied Polymer Science, 124(3), 2485, 2012 |
| 4 |
Study of Rheological Behavior During the Recovery Process of High Impact Polystyrene Using Cross-WLF Model
Peydro MA, Parres F, Crespo JE, Juarez D
Journal of Applied Polymer Science, 120(4), 2400, 2011 |
| 5 |
Degradation of High-Impact Polystyrene with Processing and Its Recovery via the Addition of Styrene-Butadiene Rubber and Styrene-Ethylene-Butylene-Styrene Block Copolymer
Parres F, Crespo JE
Journal of Applied Polymer Science, 121(1), 574, 2011 |
| 6 |
Characterization of Fibers Obtained from Shredded Tires
Parres F, Crespo-Amoros JE, Nadal-Gisbert A
Journal of Applied Polymer Science, 113(4), 2136, 2009 |
| 7 |
Thermal Degradation Analysis of Polyamide 6 Processed at Different Cycles Using Sequential Pyrolysis
Parres F, Crespo JE, Nadal-Gisbert A
Journal of Applied Polymer Science, 114(2), 713, 2009 |
| 8 |
Changes in the mechanical and thermal properties of high impact polystyrene (HIPS) in the presence of low polypropylene (PP) contents
Parres F, Balart R, Lopez J, Garcia D
Journal of Materials Science, 43(9), 3203, 2008 |
| 9 |
Compatibility study of recycled poly(vinyl chloride)/styrene-acrylonitrile blends
Garcia D, Balart R, Parres F, Lopez J
Journal of Applied Polymer Science, 106(1), 20, 2007 |
| 10 |
Effects of the injection-molding temperatures and pyrolysis cycles on the butadiene phase of high-impact polystyrene
Parres F, Balart R, Crespo JE, Lopez J
Journal of Applied Polymer Science, 106(3), 1903, 2007 |
