| 1 |
Sensitivity analysis for parameter classification of energy balance-integrated single particle model for battery cells
Hong CB, Oh SK, Kim YS
Inpress KJChE, 1000(1000), 1, 2022 |
| 2 |
An approach to calibration of BPM bonding parameters for iron ore
Chen ZR, Wang GQ, Xue DM
Powder Technology, 381, 245, 2021 |
| 3 |
Particle-resolved simulation and modeling of the conversion rate of coal char in chemical looping with oxygen uncoupling
Su MZ, Tian X, Zhao HB
Combustion and Flame, 213, 331, 2020 |
| 4 |
Lithium-ion battery SOC/SOH adaptive estimation via simplified single particle model
Cen ZH, Kubiak P
International Journal of Energy Research, 44(15), 12444, 2020 |
| 5 |
Design and proof of concept of a continuous pressurized multi-stage fluidized bed setup for deep sour gas removal using adsorption
Driessen RT, Knaken B, Buzink T, Jacobs DAF, Hrstka J, Brilman DWF
Powder Technology, 366, 859, 2020 |
| 6 |
Wear of graphite pebbles modeled using a macroscopic particle model in a pneumatic transport lifting pipe
Sun Q, Ye P, Peng W, Yu SY, Zhou HB, Wang J
Powder Technology, 361, 581, 2020 |
| 7 |
Numerical study on the fusion gasification characteristics for a char particle
Xu Y, Zhai M, Zou X, Zheng Y, Dong P
Powder Technology, 361, 719, 2020 |
| 8 |
An improved contact detection algorithm for bonded particles based on multi-level grid and bounding box in DEM simulation
Huang P, Ding YF, Miao QH, Sang G, Jia MP
Powder Technology, 374, 577, 2020 |
| 9 |
CFD modeling of biomass grate combustion using a steady-state discrete particle model (DPM) approach
Somwangthanaroj S, Fukuda S
Renewable Energy, 148, 363, 2020 |
| 10 |
Modeling of PEM fuel cell with thin MEA under low humidity operating condition
Li YB, Zhou ZF, Liu XL, Wu WT
Applied Energy, 242, 1513, 2019 |
