검색결과 : 9건
| No. | Article |
|---|---|
| 1 |
Water pool boiling across low pore density aluminum foams Righetti G, Doretti L, Sadafi H, Hooman K, Mancin S Heat Transfer Engineering, 41(19-20), 1673, 2020 |
| 2 |
Saturated vapour condensation of R134a inside a 4 mm ID horizontal smooth tube: Comparison with the low GWP substitutes R152a, R1234yf and R1234ze(E) Longo GA, Mancin S, Righetti G, Zilio C International Journal of Heat and Mass Transfer, 133, 461, 2019 |
| 3 |
Heat-transfer assessment of the low GWP substitutes for traditional HFC refrigerants Longo GA, Righetti G, Zilio C International Journal of Heat and Mass Transfer, 139, 31, 2019 |
| 4 |
Heat Pipe Finned Heat Exchanger for Heat Recovery: Experimental Results and Modeling Righetti G, Zilio C, Mancin S, Longo GA Heat Transfer Engineering, 39(12), 1011, 2018 |
| 5 |
Saturated vapour condensation of R410A inside a 4 mm ID horizontal smooth tube: Comparison with the low GWP substitute R32 Longo GA, Mancin S, Righetti G, Zilio C International Journal of Heat and Mass Transfer, 125, 702, 2018 |
| 6 |
Saturated vapour condensation of HFC404A inside a 4 mm ID horizontal smooth tube: Comparison with the long-term low GWP substitutes HC290 (Propane) and HC1270 (Propylene) Longo GA, Mancin S, Righetti G, Zilio C International Journal of Heat and Mass Transfer, 108, 2088, 2017 |
| 7 |
Flow boiling heat transfer on a Carbon/Carbon surface Doretti L, Longo GA, Mancin S, Righetti G, Zilio C International Journal of Heat and Mass Transfer, 109, 938, 2017 |
| 8 |
A new computational procedure for refrigerant condensation inside herringbone-type Brazed Plate Heat Exchangers Longo GA, Righetti G, Zilio C International Journal of Heat and Mass Transfer, 82, 530, 2015 |
| 9 |
A new model for refrigerant boiling inside Brazed Plate Heat Exchangers (BPHEs) Longo GA, Mancin S, Righetti G, Zilio C International Journal of Heat and Mass Transfer, 91, 144, 2015 |