| 1 |
Impact of Carbon Paper Anisotropy on Water Droplet Movement through the Electrodes of Proton-Exchange Membrane Fuel Cells
Moqaddari MR, Shojaeefard MH, Molaeimanesh GR
Energy & Fuels, 34(8), 10039, 2020 |
| 2 |
Direct determination of a new mode-dependent cohesive zone model to simulate metal-to-metal adhesive joints
Gheibi MR, Shojaeefard MH, Googarchin HS
Journal of Adhesion, 95(10), 943, 2019 |
| 3 |
Effects of electrode compression on the water droplet removal from proton exchange membrane fuel cells
Molaeimanesh GR, Shojaeefard MH, Moqaddari MR
Korean Journal of Chemical Engineering, 36(1), 136, 2019 |
| 4 |
An Investigation of the Potential of Improving an R1234yf Parallel Flow Condenser Performance Using Modeling and Hybrid Procedure of the Modified NSGA-II and TOPSIS
Shojaeefard MH, Zare J
Heat Transfer Engineering, 39(15), 1405, 2018 |
| 5 |
A review on microstructure reconstruction of PEM fuel cells porous electrodes for pore scale simulation
Shojaeefard MH, Molaeimanesh GR, Nazemian M, Moqaddari MR
International Journal of Hydrogen Energy, 41(44), 20276, 2016 |
| 6 |
Experimental study of redesigned draft tube of an Agnew microhydro turbine
Mirzaei A, Shojaeefard MH, Babaei A, Yassi Y
Energy Conversion and Management, 105, 488, 2015 |
| 7 |
The Investigation of the Valve Spring Stiffness Influence on the Thermal Contact Conductance Between the Exhaust Valve and Its Seat
Shojaeefard MH, Khaneshan VM, Sharfabadi MM
Heat Transfer Engineering, 36(1), 58, 2015 |
| 8 |
Shape optimization of draft tubes for Agnew microhydro turbines
Shojaeefard MH, Mirzaei A, Babaei A
Energy Conversion and Management, 79, 681, 2014 |
