| 1 |
HCCI and SICI combustion modes analysis with simultaneous PLIF imaging of formaldehyde and high-speed chemiluminescence in a rapid compression machine
Strozzi C, Claverie A, Prevost V, Sotton J, Bellenoue M
Combustion and Flame, 202, 58, 2019 |
| 2 |
Interpretation of auto-ignition delays from RCM in the presence of temperature heterogeneities: Impact on combustion regimes and negative temperature coefficient behavior
Ben Houidi M, Sotton J, Bellenoue M
Fuel, 186, 476, 2016 |
| 3 |
Experimental analysis of propagation regimes during the autoignition of a fully premixed methane-air mixture in the presence of temperature inhomogeneities
Strozzi C, Mura A, Sotton J, Bellenoue M
Combustion and Flame, 159(11), 3323, 2012 |
| 4 |
ELECTRICAL PROPERTIES OF METHANE/AIR FLAMES AT ELEVATED PRESSURES
Labuda S, Karrer M, Sotton J, Bellenoue M, Migoun A, Chernukho A
Combustion Science and Technology, 184(12), 1970, 2012 |
| 5 |
Experimental Study of Single-Wall Flame Quenching at High Pressures
Labuda S, Karrer M, Sotton J, Bellenoue M
Combustion Science and Technology, 183(5), 409, 2011 |
| 6 |
Laminar burning velocities and Markstein numbers of syngas-air mixtures
Monteiro E, Bellenoue M, Sotton J, Moreira NA, Malheiro S
Fuel, 89(8), 1985, 2010 |
| 7 |
Experimental and numerical study of the influence of temperature heterogeneities on self-ignition process of methane-air mixtures in a rapid compression machine
Strozzi C, Sotton J, Mura A, Bellenoue M
Combustion Science and Technology, 180(10-11), 1829, 2008 |
| 8 |
A thermal formulation for single-wall quenching of transient laminar flames
Boust B, Sotton J, Labuda SA, Bellenoue M
Combustion and Flame, 149(3), 286, 2007 |
| 9 |
Spark plug and corona abilities to ignite stoichiometric and lean methane/air mixtures
Bellenoue M, Labuda S, Ruttun B, Sotton J
Combustion Science and Technology, 179(3), 477, 2007 |
| 10 |
Head-on quenching of transient laminar flame: Heat flux and quenching distance measurements
Sotton J, Boust B, Labuda SA, Bellenoue M
Combustion Science and Technology, 177(7), 1305, 2005 |
