검색결과 : 9건
| No. | Article |
|---|---|
| 1 |
대기압 플라즈마 용사 공정에서의 기판 코팅 온도 영향 연구 이기영, 오현철 Applied Chemistry for Engineering, 31(6), 624, 2020 |
| 2 |
Fractionation technologies for liquid mixtures using dense carbon dioxide Bejarano A, Simoes PC, del Valle JM Journal of Supercritical Fluids, 107, 321, 2016 |
| 3 |
Characteristics of spray angle for effervescent-swirl atomizers Ochowiak M, Broniarz-Press L, Rozanska S, Matuszak M, Wlodarczak S Chemical Engineering and Processing, 98, 52, 2015 |
| 4 |
Influence of the Spray Method on Product Quality and Morphology in Spray Drying (vol 34, pg 1039, 2011) Walzel P Chemical Engineering & Technology, 37(6), 906, 2014 |
| 5 |
Comparative investigation on HVOF sprayed carbide-based coatings Xie MX, Zhang SH, Li MX Applied Surface Science, 273, 799, 2013 |
| 6 |
Influence of the Spray Method on Product Quality and Morphology in Spray Drying Walzel P Chemical Engineering & Technology, 34(7), 1039, 2011 |
| 7 |
Model-based control of particulate processes Christofides PD, Ei-Farrac N, Li M, Mhaskar P Chemical Engineering Science, 63(5), 1156, 2008 |
| 8 |
Correlation between residual stresses and adhesion of plasma sprayed coatings: effects of a post-annealing treatment Godoy C, Souza EA, Lima MM, Batista JCA Thin Solid Films, 420-421, 438, 2002 |
| 9 |
The Viscous Stagnation-Flow Solidification Problem Bian X, Rangel RH International Journal of Heat and Mass Transfer, 39(17), 3581, 1996 |