| 1 |
Influence of environmental parameters and of their interactions on the release of metal(loid)s from a construction material in hydraulic engineering
Schmukat A, Duester L, Goryunova E, Ecker D, Heininger P, Ternes TA
Journal of Hazardous Materials, 304, 58, 2016 |
| 2 |
Spent coffee grounds as a renewable source for ecopolyols production
Soares B, Gama N, Freire CSR, Barros-Timmons A, Brandao I, Silva R, Neto CP, Ferreira A
Journal of Chemical Technology and Biotechnology, 90(8), 1480, 2015 |
| 3 |
Synthesis Factors That Impact TiO2 Nanotube Activity during Gas-Phase Photocatalytic Oxidation of Methanol
Grasser JA, Stover BK, Muggli DS
Chemical Engineering Communications, 200(3), 337, 2013 |
| 4 |
Arsenic(III) Removal at Low Concentrations by Biosorption using Phanerochaete chrysosporium Pellets
Pakshirajan K, Izquierdo M, Lens PNL
Separation Science and Technology, 48(7), 1111, 2013 |
| 5 |
Screening and optimisation of the single- and double-walled carbon nanotube parameter space using a high-throughput methodology
Dunens OM, MacKenzie KJ, Harris AT
Chemical Engineering Journal, 209, 407, 2012 |
| 6 |
Study of permeate flux in micellar-enhanced ultrafiltration on a semi-pilot scale: Simultaneous removal of heavy metals from phosphorous rich real wastewaters
Hayrynen P, Landaburu-Aguirre J, Pongracz E, Keiski RL
Separation and Purification Technology, 93, 59, 2012 |
| 7 |
Optimal recovery process conditions for manganese-peroxidase obtained by solid-state fermentation of eucalyptus residue using Lentinula edodes
Arantes V, Silva EM, Milagres AMF
Biomass & Bioenergy, 35(9), 4040, 2011 |
| 8 |
Separation of cadmium and copper from phosphorous rich synthetic waters by micellar-enhanced ultrafiltration
Landaburu-Aguirre J, Pongracz E, Keiski RL
Separation and Purification Technology, 81(1), 41, 2011 |
| 9 |
Using Partition Designs to Enhance Purification Process Understanding
Pieracci J, Perry L, Conley L
Biotechnology and Bioengineering, 107(5), 814, 2010 |
| 10 |
Adsorption of Cu(II) on Araucaria angustifolia wastes: Determination of the optimal conditions by statistic design of experiments
Lima EC, Royer B, Vaghetti JCP, Brasil JL, Simon NM, dos Santos AA, Pavan FA, Dias SLP, Benvenutti EV, da Silva EA
Journal of Hazardous Materials, 140(1-2), 211, 2007 |
