| 1 |
Modeling the characteristics of pigment cluster formed foams in coatings and polymer formulations
Sudduth RD
Journal of Applied Polymer Science, 125(4), 2824, 2012 |
| 2 |
Development of the efficiency of yield energy dissipation from the yield strength power law relationship
Sudduth RD
Journal of Applied Polymer Science, 95(6), 1589, 2005 |
| 3 |
New description of viscoelasticity that can be applied to mechanical properties such as constant strain rate, creep, and stress relaxation analysis
Sudduth RD
Polymer Engineering and Science, 45(12), 1600, 2005 |
| 4 |
Comparison of the failure conditions for creep, stress relaxation, and constant strain rate measurements to predict pipe burst for two ABS materials using the universal viscoelastic model
Sudduth RD
Journal of Applied Polymer Science, 93(1), 247, 2004 |
| 5 |
Evaluation of the characteristics of a viscoelastic material from creep analysis using the universal viscoelastic model. I. Isolation of the elastic component designated as the "projected elastic limit"
Sudduth RD
Journal of Applied Polymer Science, 89(11), 2923, 2003 |
| 6 |
Comparison of the viscous and elastic components of two ABS materials with creep, stress relaxation and constant strain rate measurements using the universal viscoelastic model
Sudduth RD
Journal of Applied Polymer Science, 90(5), 1298, 2003 |
| 7 |
Indications that the yield point at constant strain rate and the inception of tertiary creep are manifestations of the same failure criterion using the universal viscoelastic model
Sudduth RD
Journal of Materials Science, 38(6), 1123, 2003 |
| 8 |
Theoretical influence of polyester molecular weight distribution variation on melt viscosity during injection molding and extrusion as influenced by ester-ester interchange
Sudduth RD
Polymer Engineering and Science, 43(3), 519, 2003 |
| 9 |
Optimizing the balance between viscosity/modulus and impact in particulate composites
Sudduth RD
Journal of Applied Polymer Science, 83(2), 291, 2002 |
| 10 |
A comparison of induction time and crystallization rate for syndiotactic polystyrene
Sudduth RD, Yarala PK, Sheng Q
Polymer Engineering and Science, 42(4), 694, 2002 |
