| 1 |
Dense granular flow - A collaborative study
Mort P, Michaels JN, Behringer RP, Campbell CS, Kondic L, Langroudi MK, Shattuck M, Tang J, Tardos GI, Wassgren C
Powder Technology, 284, 571, 2015 |
| 2 |
Quantification of segregation potential for polydisperse, cohesive, multi-component powders and prediction of tablet die-filling performance - A methodology for practical testing, re-formulation and process design
Gentzler M, Michaels JN, Tardos GI
Powder Technology, 285, 96, 2015 |
| 3 |
Experimental and computational studies of dense granular flow: Transition from quasi-static to intermediate regime in a Couette shear device
Vidyapati V, Langroudi MK, Sun J, Sundaresan S, Tardos GI, Subramaniam S
Powder Technology, 220, 7, 2012 |
| 4 |
An investigation of frictional and collisional powder flows using a unified constitutive equation
Langroudi MK, Turek S, Ouazzi A, Tardos GI
Powder Technology, 197(1-2), 91, 2010 |
| 5 |
An investigation of frictional and collisional powder flows using a unified constitutive equation (vol 197, pg 91, 2010)
Langroudi MK, Turek S, Ouazzi A, Tardos GI
Powder Technology, 198(2), 314, 2010 |
| 6 |
Transmission of stresses in static and sheared granular beds: The influence of particle size, shearing rate, layer thickness and sensor size
Langroudi MK, Sun J, Sundaresan S, Tardos GI
Powder Technology, 203(1), 23, 2010 |
| 7 |
Measurement of velocity and density profiles in discharging conical hoppers by NMR imaging
Gentzler M, Tardos GI
Chemical Engineering Science, 64(22), 4463, 2009 |
| 8 |
Steady states in granulation of pharmaceutical powders with application to scale-up
Michaels JN, Farber L, Wong GS, Hapgood K, Heidel SJ, Farabaugh J, Chou JH, Tardos GI
Powder Technology, 189(2), 295, 2009 |
| 9 |
Prevent caking during solids handling
Purutyan H, Pittenger BH, Tardos GI
Chemical Engineering Progress, 101(5), 22, 2005 |
| 10 |
Elements of particle technology in the chemical industry
Kalman H, Tardos GI
Particulate Science and Technology, 23(1), 1, 2005 |
