| 1 |
Pros and cons of implementing new hybrid amine solution for simultaneous removal of mercaptan and acid gas
Rostami A, Tavan Y
Chemical Engineering Research & Design, 143, 150, 2019 |
| 2 |
Two-Dimensional Mathematical Model for Flue Gas Desulfurization in a Spray Column at Low Temperatures with Seawater: Design and Optimization
Tavan Y, Hosseini SH, Olazar M
Energy & Fuels, 30(4), 3347, 2016 |
| 3 |
Some notes on process intensification of amine based gas sweetening process for better temperature distribution in contactor to reduce the amount of amine as a result of corrosion and foaming
Tavan Y, Gholami H, Shahhosseini S
Journal of Loss Prevention in The Process Industries, 41, 169, 2016 |
| 4 |
Validation of Experimental Results Through Reactor Modeling for Catalyzed Dehydration of Methanol Reaction
Tavan Y, Shariati A, Nikou MRK
Energy Sources Part A-recovery Utilization and Environmental Effects, 37(11), 1210, 2015 |
| 5 |
Two practical equations for methanol dehydration reaction over HZSM-5 catalyst - Part I: Second order rate equation
Tavan Y, Hasanvandian R
Fuel, 142, 208, 2015 |
| 6 |
A Note on an Integrated Process of Methane Steam Reforming in Junction with Pressure-Swing Adsorption to Produce Pure Hydrogen: Mathematical Modeling
Tavan Y, Hosseini SH, Olazar M
Industrial & Engineering Chemistry Research, 54(51), 12937, 2015 |
| 7 |
Feasibility and parametric study of tetrahydrofuran dehydration using reactive distillation with low energy requirement
Tavan Y
Energy, 76, 622, 2014 |
| 8 |
Energy optimization and comparative study of pre- and post-fractionator extractive dividing wall column for the CO2-ethane azeotropic process
Tavan Y, Riazi SH, Nozohouri M
Energy Conversion and Management, 79, 590, 2014 |
| 9 |
An intensified industrial reforming process by change in combustible fuel
Tavan Y
Energy Conversion and Management, 88, 1011, 2014 |
| 10 |
Effect of the P/Al ratio on the performance of modified HZSM-5 for methanol dehydration reaction
Tavan Y, Nikou MRK, Shariati A
Journal of Industrial and Engineering Chemistry, 20(2), 668, 2014 |
