| 1 |
Ultrafast synthesis of the nanostructured Al59Cu25.5Fe12.5B3 quasicrystalline and crystalline phases by high-energy ball milling: Microhardness, electrical resistivity, and solar cell absorptance studies
Amini M, Rahimipour MR, Tayebifard SA, Palizdar Y
Advanced Powder Technology, 31(10), 4319, 2020 |
| 2 |
Microstructure and mechanical properties of an ultrafine grained Ti5Si3-TiC composite fabricated by spark plasma sintering
Kasraee K, Yousefpour M, Tayebifard SA
Advanced Powder Technology, 30(5), 992, 2019 |
| 3 |
Mechanical properties and microstructure of Ti5Si3 based composites prepared by combination of MASHS and SPS in Ti-Si-Ni and Ti-Si-Ni-C systems
Kasraee K, Yousefpour M, Tayebifard SA
Materials Chemistry and Physics, 222, 286, 2019 |
| 4 |
Influence of C addition on solid-state reaction of Ti-Si-C system
Kasraee K, Yousefpour M, Tayebifard SA
Materials Chemistry and Physics, 217, 379, 2018 |
| 5 |
Phase and morphology studies of B4C-SiC nanocomposite powder synthesized by MASHS method in B2O3, Mg, C and Si system
Roghani H, Tayebifard SA, Kazemzadeh A, Nikzad L
Advanced Powder Technology, 26(4), 1116, 2015 |
| 6 |
Effect of Mg/B2O3 molar ratio and furnace temperature on the phase evaluation and morphology of SiC-B4C nanocomposite prepared by MASHS method
Roghani H, Tayebifard SA, Kazemzadeh A, Nikzad L
Materials Chemistry and Physics, 161, 162, 2015 |
| 7 |
Mechanochemical synthesis of Al2O3-ZrB2-ZrO2 nanocomposite powder
Abbasi BJ, Zakeri M, Tayebifard SA
Materials Research Bulletin, 49, 672, 2014 |
